Hydraulic Pumps

Find the Right VEVOR Hydraulic Pumps for Press, Splitter, or Boat

Uncertain about the drive required for your project? You can match it with VEVOR. Our hydraulic pumps include 750W electric power packs, air-over-foot pumps with a maximum pressure of 10,000 PSI, two-stage gear pumps for log splitters with a flow rate of 11 to 22 GPM, PTO units for dump trailers, and marine helm pumps for outboard steering. Each converts motor, air, or engine power into controlled hydraulic force for shop, field, and water. They can be single-acting or double-acting, with solenoid or manual valves.

Electric, Air, Gear, and PTO: Four Ways to Move Oil

Electric power packs, air-over-foot pumps, engine-driven gear pumps, and PTO units are the four primary drives for VEVOR's hydraulic pumps. Your cylinder type and power supply determine the right option.

750W Electric Power-Pack Pumps at 10,000 PSI

The electric unit is the most independent choice. Running on conventional 110 or 120V, a VEVOR electric hydraulic pump combines a 750W motor, a 10,000 PSI output, and a reservoir into a single power pack. For shorter or longer runs, reservoir capacities range from 0.53 gallons (2L) to 2.1 gallons (8L). The 8L tank, without a mid-job refill, allows for a longer cylinder stroke.

Every hydraulic electric pump is constructed around a certain type of cylinder. A double-acting hydraulic pump powers the cylinder in both directions, whereas a single-acting hydraulic pump employs a solenoid or manual valve with a pedal or lever switch. All day long, they power punching, bending, and jacking machines. While a lever switch provides direct manual control at the pump, a pedal switch frees your hands.

This hydraulic power unit style requires only an outlet and a hose to operate because the motor, valve, and tank are integrated. These hydraulic pumps are the easiest way to get significant force if your shop has power and you want push-button pressure without an air hookup.

Air-Over Foot Pumps for Frame Machines

Is there no electricity available? Use compressed air. With a foot-operated treadle, an NPT 3/8-inch oil output, and a 1/4-inch air input, a VEVOR air hydraulic pump uses an air-over-hydraulic design to reach 10,000 PSI with a shop compressor. Reservoirs range from 0.18 gallons to 0.61 gallons. The aluminum or metal casing resists garage knocks, and a shop compressor sized for the treadle maintains a steady oil flow.

These foot pumps perform exceptionally well in auto body work, driving frame machines, pulling posts, and on ships equipped with remote actuators, hoses, and spray guns. Both hands stay free while you work because you pump with your foot.

Note that VEVOR's human-powered alternative here is the foot-actuated air treadle, not a hand pump, if you explicitly want a hand-lever manual hydraulic pump. These air-driven hydraulic pumps provide full pressure without a motor or wiring for most rigging and repair activities.

2-Stage Gear Pumps From 11 to 22 GPM

Gears are essential for mobile equipment and log splitters. The two-stage aluminum construction of a VEVOR hydraulic gear pump automatically switches from high flow at low pressure to low flow at high pressure, letting a splitter cycle quickly before powering through a knot. Spinning at 3600 RPM, flow ranges include 11, 13, 16, and 22 GPM at up to 4000 PSI. Because the pump senses the load and shifts gears automatically, you never have to touch a valve thanks to the automated stage shift.

These are perfect for splitters and snowplows since they bolt onto a compact engine with a 1/2 to 3/4-inch NPT outlet. PTO pumps operate at 540 RPM for tractor-driven gear, providing 16.6 or 21.2 GPM at 2250 to 2500 PSI via an SAE 12 port.

This PTO design works well for dump trailers, scissor lifts, and truck tailgate lifts. For the most demanding outdoor tasks, these hydraulic pumps convert raw horsepower into consistent hydraulic flow across engine and shaft drives.

Marine Helm Pumps and Notes on Belt-Drive and 12V

Hydraulics also power steering on the water. A VEVOR hydraulic steering pump, also known as a helm pump, installs at the wheel and forces fluid to a two-way lock cylinder. It has an aluminum alloy housing, a working pressure of 1000 psi (6.9 MPa) or 2.5 MPa, and an outboard rating from 90 to 300 HP.

For a full boat steering kit, these pair with hoses ranging from 20 to 26 feet and a matching cylinder. Front-mount helm choices have a displacement of about 1.4 cubic inches. These helm units can withstand salt and mist thanks to their aluminum alloy housings and interchangeable shaft seals.

A 12V hydraulic pump powered by DC and a belt-drive hydraulic pump driven by an engine pulley are two popular searches that don't match this lineup. VEVOR offers electric AC, air, gear, PTO, and marine helm units, while 12V DC power packs are in a different power-unit line. This keeps your search for these hydraulic pumps focused on the appropriate shelf.

Matching Pressure and Application Across VEVOR Hydraulic Pumps

Your choice comes down to two factors: the pressure you need and the vehicle you are driving. Here is how VEVOR hydraulic pumps match PSI and task needs.

From 2,250 to 10,000 PSI: Reading the Ratings

The headline specification is pressure. Electric and air units, the power behind shop presses, frame machines, and jacks, reach 10,000 PSI at the maximum. This kind of high-pressure hydraulic pump is ideal for lifting, pressing, and bending steel since it moves very little oil with tremendous power.

To cycle a cylinder quickly, gear and PTO pumps trade pressure for flow: 2,250 to 4,000 PSI combined with 11 to 22 GPM. Marine steering wheels don't need crushing force; they need precise control. As a result, marine helm pumps operate at a lower pressure of around 1,000 psi. This lower range means a single product catalog can easily cover both a heavy-duty steel-bending press and a delicate steering system.

Since both systems use hydraulic oil matched to a specific thickness, choosing the right fluid matters as much as matching the pressure. When choosing a pump, focus on two main numbers: PSI (pressure) and GPM (flow rate). Just remember this simple rule: high flow gives you speed, while high pressure gives you force. Balancing that trade-off is your very first step in choosing the perfect hydraulic pump.

Auto Body, Log Splitting, and Marine Jobs

The right pump fits the job. Auto body businesses rely on 10,000 PSI air and electric units to power presses, pulling posts, and frame machines where foot control keeps both hands on the panel. Fabricators use the same electric power packs for bending and punching.

Flow is necessary for mobile and outdoor employment. While 540 RPM PTO pumps power truck tailgate lifts, scissor lifts, and dump trailers from a tractor, two-stage gear pumps power wood log splitters and snowplows from a small engine. Boaters use helm pumps to direct outboards up to 300 horsepower. The electric power packs mount easily next to a bench off wall power, and matching flow to the cylinder size reduces cycle times on a splitter and steering light at the wheel.

Match the drive and pressure to the machine you need to move first. When properly sized, VEVOR hydraulic pumps provide the precise force and flow each task needs without wasting energy or effort.

Why Choose VEVOR Hydraulic Pumps?

VEVOR hydraulic pumps provide the pressure, flow, and dependability that every hydraulic system needs, whether it's a 10,000 PSI shop press, a firewood splitter, or a boat helm. Electric power packs, air foot pumps, two-stage gear pumps, PTO units, and marine steering pumps in single- and double-acting configurations are all part of the lineup. Every purchase is backed by strong steel and aluminum construction, high-pressure performance, and attentive customer service. Are you prepared to power up? Explore VEVOR hydraulic pumps now to operate your machinery with assurance.

FAQs

What is the difference between single and double acting pumps?

A double-acting pump powers a cylinder in both directions, while a single-acting pump drives it in one direction and relies on a spring or load to return it. Double-acting pumps suit presses and other devices that require a controlled return.

How much pressure do VEVOR hydraulic pumps produce?

Marine helm pumps run at about 1,000 PSI for steering; gear and PTO pumps operate at 2,250 to 4,000 PSI at higher flow; and electric and air pumps exceed 10,000 PSI for presses and frame machines.

Does VEVOR sell a 12V or belt-drive hydraulic pump?

Not in this group. This group includes AC electric, air, gear, PTO, and marine helm units. This article does not list 12V DC power packs; it mentions them separately under hydraulic power units.

Which pump is right for a log splitter?

The typical option is a two-stage gear pump, which automatically switches to high pressure to push through difficult knots after supplying high flow to lengthen quickly. VEVOR offers models up to 4,000 PSI at 11-22 GPM.