Download VEVOR App 
Get $5.00 Off $99.00+ Orders on Your First 3 App Orders
Scan the QR code to download
This division offers high-performance air hydraulic pump choices that are intended to perform industrial and automotive tasks that are not easy. These pumps provide penetration of 10,000 PSI and hands-free operation with a foot or remote control, from frame machines to hydraulic presses. Constructed on reliability and performance, all the models accommodate single-acting cylinders as well as heavy workloads. These pumps are reliable constructions with filled oil in the factory and good pressure output, which are a reliable source of power at work.
Are you working with frame machines, presses, or heavy lifting equipment that requires controlled force? The air hydraulic pump achieves this requirement by converting the compressed air to a dependable hydraulic pressure.
The air hydraulic pump is needed because of the need to produce a controlled force in demanding conditions. The category is a combination of solutions aimed at strength, safety, and performance that is consistent.
This division involves the pumps constructed to repair automobiles, industrial machinery, and construction activities. These pumps will minimize physical work and provide constant 10,000 PSI output with foot-operated and remote-controlled designs to solve single-acting needs.
In places where human force cannot generate the necessary pressure for heavy lifting, pressing, bending, and straightening of frames, air hydraulic pumps are crucial to use the compressed air for controlled hydraulic force. Depending on the type of machine to be powered, the size of the reservoir, and how the machine is controlled, the right model should be used.
A foot-operated pump releases both hands to steer and place the work, and exerts pressure through the foot. The 10,000 PSI foot-actuated pump with 1/2 gallon reservoir is ideal for automotive body shops, car frame straightening, and press applications where hands-free pressure control is required. Vibration during operation is reduced on some models with a non-slip base and mounting holes, which ensure the pump is stable under sustained loading.
It's a 10,000 PSI foot treadle pump with a 0.42-gallon reservoir that is pre-filled with oil and requires no setup or delays to use. It is suitable for automotive frame machines and hydraulic press applications where downtime between jobs is not to be overlooked due to the need to maintain a constant and even flow distribution under load.
The operator should be able to stand clear from the equipment during pressurisation. Making use of a remotely controlled pump is the safest working arrangement. The 10,000 PSI remote control pump includes a 0.61-gallon reservoir and works from up to 3 meters away from the pump, and can be easily integrated into existing pneumatics systems with standard NPT fittings. The larger reservoir provides more hours of working time than, say, the smaller capacity designs.
Not all applications demand a giant container or a great length of hose. The 10,000 PSI compact pump is compact, with a metal shell design that pumps at full pressure in a smaller space for precision industrial and aerospace applications that restrict space around the pump. It has the same max psi as full-size models in the range, even though it's small.
Heavy-duty repair and rigging jobs require pumps that can provide larger oil volumes and have stronger components to endure prolonged heavy-duty applications. The 10,000 PSI pump features a 0.6-gallon reservoir, is reinforced for sustained high-pressure output during long rigging and repair periods, and is provided with a spray gun for controlled air input as a run-stop mechanism.
A short-hose pump will provide the operator with quicker response and control during the pressurization phase in confined work areas where long hoses are not easy to handle. Built and released pressure efficiently in limited workspaces, the foot-operated 10,000 PSI pump with short hose and spray gun includes an internal relief system to prevent over-pressure of hydraulic components when spraying in close range.
The use of air hydraulic pumps depends on their reliability and usefulness in repeated high-pressure use. VEVOR models are designed to ensure stable performance, operator safety, and long lifespan under challenging industrial and automotive conditions.
The VEVOR air hydraulic range pumps can provide a maximum output of 10,000 PSI pressure, which can be used for any single-acting cylinder, hydraulic press, puller, and/or ram without having to upgrade to a higher-rated pump when the load increases. This uniform pressure ceiling throughout the entire span will enable the most extreme tasks in the intended application range to be performed by any model chosen.
Selected models are filled with hydraulic oil and plug-and-play ready to go without the delay of filling and bleeding the oil before initial operation. This is especially useful in professional workshop settings where equipment downtime between jobs can have a significant impact on productivity and productivity per day.
During operation, an internal relief valve prevents pressure from ever exceeding safe operating limits, safeguarding the pump's mechanical internals and attached hydraulic components from stress damage from pressure surges. This automatic protection allows for the pump and cylinders, rams, and presses attached to the pump to have a longer service life without needing to monitor the pressure during operation.
All pump cores and outer housings in the VEVOR line are manufactured with aluminum and metal shell construction to provide for wear, impact, and industrial and automotive harsh environment resistance. Using this material results in the pump's performance remaining stable even after prolonged daily use, while the pumping head does not cause any deformation of the housing, and the inner parts of the pump do not degrade in the early stages of operation at high pumping head.
VEVOR air hydraulic pump models have standard NPT connections, which can be easily connected to pneumatic systems and hydraulic tools without the need for adapters or custom fittings. Because of their wide variety of compatibility, they can be used as suitable replacement and upgrade parts to workshops already operating hydraulic equipment from various manufacturers.
This category also provides a full performance, durability, and value range of an air hydraulic pump. Between small precision models and large industrial units, the user is free to find the solution that suits working load and budget. Visit product-detail pages, compare specifications, and select the right air hydraulic pump for your application.
