VEVOR 14710 BTU Pool Heat Pump, Electric Pool Heater for Above Ground Up to 3962 Gallons, Max COP 5.13, Heating & Cooling Dual Mode, Low Noise Smart Inverter Compressor, GFCI Protection for Swimming

VEVOR Above Ground Pool Heat Pump Generates 14,710 BTU with a Max COP of 5.13

The VEVOR above ground pool heat pump can deliver up to 14.71 kBTU of heat output using only clean electricity. Its maximum coefficient of performance is 5.13. It means that for every unit of electricity it uses, the unit gives off more than 5 units of heat energy. This efficiency ratio means that owners of above-ground pools can save money on their energy bills each month during heating cycles.

The unit takes heat directly from the air around it and moves it to the pool water. Pools with a capacity of approximately 2,113 to 3,962 gallons reach their target temperatures faster than pools with lower output, which cuts down on the time you have to wait before swimming. The 14,710 BTU ceiling has enough thermal capacity to offset heat loss at night and keep the water temperature steady, even when the weather changes.

Dual Heat and Cool Modes Cover Ambient Temperatures from 23°F to 109°F

This above ground pool heat pump has two thermal modes: a heating mode that operates at water temperatures between 59 and 104°F (15 and 40°C) and a cooling mode that operates at temperatures between 46 and 82°F (8 and 28°C). The unit operates between 23°F and 109°F (-5°C and 43°C), so it can run in a wide range of conditions without needing to be turned off during typical cold snaps or peak summer heat. Pool owners get one device that can heat the pool in the winter and cool it in the summer.

Changing modes lets you swim for much longer than a heating-only unit can. The cooling mode actively pulls heat out of the water, bringing it back into the preferred range during the summer months when the pool water gets too hot. This two-way thermal control makes the unit just as useful in July as in November, so the water can stay comfortable across a wide range of weather conditions.

Above Ground Pool Heat Pump Smart Inverter Compressor with Salt and Chlorine-Resistant Titanium Heat Exchanger

The fixed-speed smart inverter compressor at the heart of this pool heat pump delivers steady, controlled output without the energy spikes that come with on/off compressor cycling. The system works well even in chemically treated pool water, thanks to its spiral titanium heat exchanger, which is resistant to salt and chlorine. Pure copper evaporator coils improve thermal conductivity even further and are designed for outdoor use over extended periods.

For above-ground pools that use saltwater sanitation systems, titanium heat exchanger resistance is very important. It is because standard steel or aluminum parts can corrode more quickly and may need to be replaced at a higher cost. The spiral design increases the surface area that comes into contact with the refrigerant and water, making heat transfer more efficient for each unit of energy the compressor consumes. 

GFCI Protection and 58 dB Operation Ensure Safe, Quiet Poolside Performance

This electric pool heater has built-in GFCI (Ground Fault Circuit Interrupter) protection that cuts off power in milliseconds if it detects a ground fault near the water. Many jurisdictions have codes requiring pool electrical equipment to have this safety feature. The built-in GFCI eliminates the need for a separate external protection device at the circuit level.

The unit's acoustic output while running is 58 dB, about the same as a normal conversation. This sound level is low enough to be placed next to patios, decks, and other outdoor entertainment areas without causing noise complaints or interfering with poolside activities. Because it runs quietly, this heat pump is useful for homes close together and for homes where the equipment's noise bothers neighbors.

Pool Compatibility Range of 2,113–3,962 Gallons for Frame and Above-Ground Pools

This above ground pool heat pump is sized for pools that hold between about 2,113 and 3,962 gallons (8–15 m³). It includes the most common frame pool and above-ground inflatable pool sizes that people have at home. The maximum capacity of 3,962 gallons is enough for standard 15-foot round above-ground pools, which are one of the most common types of portable pools in home backyards.

Frame pools, Intex-style above-ground pools, and oval inflatable pools all have enough space for this heater, so people who own more than one type of pool can use it. The unit works just as well for fitness pools, recreational swim pools, and poolside parties, where a steady water temperature enhances the experience. 

φ1.3" and Ø1.6" Inlet/Outlet Ports with PVC Adapter Fittings for Fast Connection

The heat pump has two port sizes: φ1.3 in (33 mm) and Ø1.6 in (40.6 mm). It also comes with adapters that fit PVC pipes with diameters of 1.26 in (32 mm) and 1.5 in (38 mm). This range of compatible diameters works with most above-ground pool filter and pump systems without needing custom fittings or professional plumbing changes. The unit will circulate water through the heat exchanger well if the minimum inlet flow is 3 GPM.

The 3 GPM minimum flow threshold is very important for smaller above-ground pools, as they often have lower-capacity filter pumps that produce less flow than in-ground systems. Most installations won't need any more pump upgrades if they meet this threshold with a standard pool filter pump. The connection goes directly into the existing pool plumbing loop, making setup quick and easy for most pool owners.

Energy-Efficient Electric Pool Heater Supports Swimming, Fitness, and Pool Parties

This above ground pool heat pump runs on clean electricity and doesn't need a gas line, venting, or combustion byproducts. It can be used in any outdoor residential setting without the need for gas-powered alternatives. The COP of 5.13 means the unit uses less energy than an electric resistance heater, allowing you to heat your home every day without spending much money.

For fitness swimmers who need the water temperature to remain stable for long periods while swimming laps, the unit maintains thermal conditions without temperature drift. Families who host poolside parties can plan events without worrying about the weather because they can always get warm water when they need it.