Customer Reviews for VEVOR Pneumatic Jewelry Engraver Machine 110V 60Hz Pneumatic Hand Engraving Machines 400-8000 Rpm Pneumatic Graver Handpiece Double-Head Micro Engraer for Jewelry Crafts and Wrought Iron

This is a great little power engraver. Like most in this category, it's air cooled internally, so you will always hear a little air going through inside when it's running. It works well and doesn't leak. I'd recommend another regulator between this and the compressor just to ensure that you don't hit this thing with more PSI than you should have (I think around 40-45 PSI is what this is expecting and what the handpieces can handle as a maximum). It comes with a filter in the mix, but you could buy a regulator/filter and bypass the one it comes with if you want to. The handpiece chucks don't quite fit 1/8" standard gravers, common here in the US from a variety of jewellery tool companies, so I had to take the chucks and drill them out to 1/8". It was easy and quick, and now I can use a variety of carbide gravers and standard HSS gravers. You slide the graver in and tighten a grub screw (set screw) to hold onto things. The handpieces leak air (only a tiny amount) but this is NORMAL. It's common in all of these, and it's just the way they're designed. Since the air has to go to the handpiece to move it, the excess has to go SOMEwhere, so it's designed to leak out the handpiece. One of my handpieces leaks a little more than the other, but not enough to really notice a difference in usability. I use an 8 gallon quiet compressor with this, and it kicks in relatively often. My compressor is designed to kick on at 90PSI and shut off at 120PSI, so it kicks on maybe every 4-5 minutes. If I had a larger compressor, it would kick on less often. If I had it set to kick on at a lower PSI, it would kick on less often. But it's a CAT compressor, and really very quiet as compressors go, so it's not a nuisance. I barely even pay attention when it kicks on and off. My shop exhaust fan is much louder. This uses 6mm OD tubing. It will TAKE 1/4" OD tubing without much in the way of issues, but you should really use 6mm if you can find it. It's cheap online from a variety of places. It does not come with enough 6mm tubing to do much more than connect the foot pedal to the main box. Connecting your compressor to the air filter and the air filter to the main box means you're going to need more tubing of your own. Controls are standard. There's a switch to switch between handpiece 1 and handpiece 2 (it comes with TWO handpieces, which is crazy for this price, but great). And then there's an 'auxillary' connection that's designed for other kinds of tools that require air. There's a 'bias' dial, which controls the starting point of the foot pedal. The bias knob should be closed when you're adjusting the machine.There's a primary air pressure knob (good for different kinds of handpieces and controlling how strong you want the pressure to be, dependent on what the handpiece will take (they're all different)). And there's a speed control knob. A FANTASTIC engraver!

This is my 2nd engravor the first one gave us so much problems, so I’m hoping you can help me with that. We purchased it over a year ago, and haven’t had use out of it for 6 months . First thing was the foot pedal then one was finally sent after 6-8 weeks, then this plastic piece that looks like a regulator of sorts broke, so we just ordered straight from the company. So now we would like to take all these parts send them to you and see what kind. Of price I might get for a new one sent to my studio Donna Voelker Out of This World Jewelry and Gemstones

Bought this for engraving custom jewelry pieces and it’s been a solid addition to my setup. Does a nice job adding detail work that I couldn’t achieve before.

Arrived early and performs exactly as expected. No issues so far.

I have contacted you so that you could help me to get other parts and you have not been able to help me. It seems that since I already bought the rest, you do not care about helping your customers. I think it is a lack of customer service; it leaves much to be desired.

Works well with good power and speed control. Feels comfortable to handle and easy to manage during use.

I was hesitant at first due to the lower price compared to other brands, but this engraver exceeded my expectations. The high RPM and PSI range make it ideal for everything from soft stones to tougher metals. I’ve been using it for some custom projects, and it performs consistently well. The foot pedal control is smooth, and I love the flexibility it offers. Just make sure to set up the air pressure correctly for best results. Overall, I’d recommend this to pros and hobbyists alike.

I’ve been using this engraver to customize metal jewelry pieces, and it works flawlessly. The adjustable speed from 1200 to 6000 RPM is a big plus; it handles everything from light detail work to deep engraving on tougher metals. It’s built solidly, and the compact design fits my small workspace perfectly. I wish there were a few more setup instructions, but once it’s up and running, it’s smooth sailing. Great value for the quality!

Missing end pieces to engraver and no engraving knives, can't find any online, no response, service is broken. This is disturbing. Quality control is broken.