All

Featured items you may like

AS-250-150NLXCZDQV1

VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM

VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
$135.99
135.99
Price including VATSee details
  • · X-Axis Power Feed: The X-Axis power table feed is made of sturdy aluminum material. It is also designed with a handle, buttons, and knobs for simple operation. Voltage: 110V, 60Hz. Revolution Speed: 0-200 RPM. High quality and efficiency to handle all your milling needs.
  • · Long Service Life: The power feed for the milling machine features a smooth and strengthened polished surface, which is waterproof, dustproof, and oilproof. That ensures a long service life in harsh working conditions.
  • · High Efficiency & Precision: The x-axis power feed is equipped with spiral bevel gears for rapid control. There are bearings to achieve high efficiency and precision as well.
  • · Low Noise & Easy Operation: The milling machine power feed features 9 levels of moving speeds, set by the rotary knob on the side. Moreover, it makes little noise when used, an essential piece of equipment for every workshop.
  • · Wide Compatibility: This milling table power feed fits multiple vertical knee-type mills with the same mounting pattern and a 5/8" diameter shaft on the end. Such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc.
 

Frequently Bought Together

People Who Bought This Item Also Bought

VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
AS-250-150 X-Axis Power Feed Kit
Our AS-250-150 x-axis feed kit features a robust shell and precise components. It works efficiently and quietly on a milling machine with a 5/8" shaft end. Besides, it is designed with buttons and knobs for simple operation. It is a good choice for your milling machine.
  • X-axis Power Feed
  • Long Service Life
  • High Efficiency & Precision
  • Quiet & Easy Operation

VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Tough Equipment & Tools, Pay Less
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
  • Premium Tough Quality
  • Incredibly Low Prices
  • Fast & Secure Delivery
  • 30-Day Free Returns
  • 24/7 Attentive Service
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Tough Equipment & Tools, Pay Less
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
  • Premium Tough Quality
  • Incredibly Low Prices
  • Fast & Secure Delivery
  • 30-Day Free Returns
  • 24/7 Attentive Service
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Compact & Versatile
The compact power knee feed can work automatically at a constant speed or manually by pressing the speed control. And the circuit breaker protects the transmission gear and electronic components.
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Sturdy & Durable
The milling machine table power feed is made of rugged aluminum material. Its finish has been polished and resists corrosion and wear. That makes it work for a long time.
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Quiet Operation
The power feed for mill adopts spiral bevel gears to move freely and quietly on the mill. Considering that it is noisy in the garage, it would be helpful that the feed cut noises.
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Precise Bearing
The mill power feed is also equipped with precise bearings that ensure its smooth and stable movement. Less vibration and strain enhance the efficiency of the whole milling machine.
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Excellent Performance
The power feed for milling machine is easy to install and operate. Only a little maintenance is enough for its long-term regular running.
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Wide Application
The power table feed fits most vertical knee mills with a 5/8" shaft end, such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, etc.
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Specifications
  • Model: AS-250
  • Condition: New
  • Voltage: 110 V, 60 Hz
  • Torque: 150 lbs
  • Rotate Speed: 0-200 rpm
  • Power Source: Electric
  • Control: Manual
  • Package size: 13"x7.9"x7"/33x20x18 cm)
  • Gross weight: 14.3 lb/6.5 kg
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Package Content
  • 1 x AS-250-150 X-Axis Power Feed for Milling Machine
  • 1 x Accessory Set
  • 1 x Manual
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM

VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Tough Equipment & Tools, Pay Less
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
  • Premium Tough Quality
  • Incredibly Low Prices
  • Fast & Secure Delivery
  • 30-Day Free Returns
  • 24/7 Attentive Service
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Tough Equipment & Tools, Pay Less
VEVOR is a leading brand that specializes in equipment and tools. Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. Today, VEVOR has occupied markets of more than 200 countries with 10 million plus global members.
Why Choose VEVOR?
  • Premium Tough Quality
  • Incredibly Low Prices
  • Fast & Secure Delivery
  • 30-Day Free Returns
  • 24/7 Attentive Service
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
AS-250-150 X-Axis Power Feed Kit
Our AS-250-150 x-axis feed kit features a robust shell and precise components. It works efficiently and quietly on a milling machine with a 5/8" shaft end. Besides, it is designed with buttons and knobs for simple operation. It is a good choice for your milling machine.
  • X-axis Power Feed
  • Long Service Life
  • High Efficiency & Precision
  • Quiet & Easy Operation
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Compact & Versatile
The compact power knee feed can work automatically at a constant speed or manually by pressing the speed control. And the circuit breaker protects the transmission gear and electronic components.
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Sturdy & Durable
The milling machine table power feed is made of rugged aluminum material. Its finish has been polished and resists corrosion and wear. That makes it work for a long time.
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Quiet Operation
The power feed for mill adopts spiral bevel gears to move freely and quietly on the mill. Considering that it is noisy in the garage, it would be helpful that the feed cut noises.
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Precise Bearing
The mill power feed is also equipped with precise bearings that ensure its smooth and stable movement. Less vibration and strain enhance the efficiency of the whole milling machine.
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Excellent Performance
The power feed for milling machine is easy to install and operate. Only a little maintenance is enough for its long-term regular running.
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Wide Application
The power table feed fits most vertical knee mills with a 5/8" shaft end, such as Bridgeport, Precision Matthews, Grizzly, Enco, Jet, Sharp, Acer, Webb, GMC, Kent, Clark, Supermax, etc.
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Package Content
  • 1 x AS-250-150 X-Axis Power Feed for Milling Machine
  • 1 x Accessory Set
  • 1 x Manual
VEVOR X-Axis Power Feed 150 Lbs Torque for Bridgeport Type Milling Machines 0-200 RPM
Specifications
  • Model: AS-250
  • Condition: New
  • Voltage: 110 V, 60 Hz
  • Torque: 150 lbs
  • Rotate Speed: 0-200 rpm
  • Power Source: Electric
  • Control: Manual
  • Package size: 13"x7.9"x7"/33x20x18 cm)
  • Gross weight: 14.3 lb/6.5 kg

Specification

Type
X Traverse
Model
AS-250
Voltage
110V, 60 Hz
Rotate Speed
0-200 RPM
Max Torque
150 in-lb
Power Source
Electric
Control
Manual
Item Weight
14.3 lbs / 6.5 kg
Item Dimensions(L x W x H)
6.5 x 4.5 x 13 in / 16.5 x 11.4 x 33 cm
Questions and Answers
1 Questions
What are the dimesions for the attachment holes??
The dimension for the copper gear bore is 16.
By vevor

Customer Reviews

  • 4.8
  • 4.6
  • 4.6
  • 4.7
John John
Retired tool maker.
I was able to make the power feed work on the "Y" axis, although it was made for the "X" axis. The instructions were useless and did not help at all. It would be very helpful if you have a lathe to make an adapter to have it work on the Y axis. Once you adjust the gear engagement ,it works fine..
0
David David
Production Officer
Had minimum modifications and adjustments to fit in my milling machine, because it is a small mill. Once installed, perfect. Easy moves both sides, perfect synchromism. Thank you..... :o)
0
randee - Florida randee - Florida
Directions so so. Had to make a few mods but other than that, works great !
Had to make some mods. But other than that, works great !
0
julio vasquez julio vasquez
Bien Hecho
lo compre hace un mes y realmente facil de instalar y rapido , muy buen funcionamiento y de buena calidad.
0
Slausonm Slausonm
Good product if you can figure out how to install on your machine.
The product is good, but the install instructions are terrible. There are no instructions detailing how to measure the shims for proper adjustment. I installed mine on a Bridgeport mill with the old gear drive. The install requires you to modify the lead screw and cut new woodruff key seats. All in all, I’m pleased with the product, but the install is not a plun play.
0
Precision Machine Tool Services Precision Machine Tool Services
Plenty of power!
I rebuild machines for a living and can say I have installed a lot of these power feeds over the years! This unit is well made for it’s crazy inexpensive price. When you consider the cost of the servo brand at almost $1,000 these work great easy to install
0
Kindle Customer Kindle Customer
good quaility unit didn't fit my machine
everything was fine except it didn't fit my jet milling machine
0
Charles R Ramirez Charles R Ramirez
Really good value
Product is very affordable compared to the proper unit for my 1hp Bridgeport machine. It seems to work well and is much cheaper. However, like many other comments have mentioned. It requires some light trimming to fit. I had to file down the keyway and a couple other small things. It's not much and relatively easy to do.The bang for the buck is certainly there and it's well worth the purchase.
1
Gary Z Gary Z
Good product so far
I read all the reviews on the power feed and understand some of the installation problems people described. These types of units never come with very good installation instructions so a little extra time needs to be spent finding the correct shim thicknesses to do it correctly. This unit is a replacement unit and it required a little work to get setup exactly as required. Most of the complaints I read appear to be related to how the unit was installed and it being noisy. From my experience installing several power feeds is that the noisier units weren’t shimmed correctly and had to be adjusted until they were installed correctly. Shimming is very important and if done correctly the unit will operate properly and be very quiet. My old WellSetting unit worked great but regardless of how I shimmed it it was noisy. It failed after about 20+ years of use in my shop. This new unit went on as I expected it to and is super quiet compared to the old unit. It has been on and used for several hours now and works flawlessly.. I just hope I get many good years if service out of it given it‘s a low priced unit. No complaints so far.
0
Dialdin Dialdin
Works great after modifying to fit, Instructions are uselet
Once installed with proper lash on the gears it works great. A few parts are junk but at this price you simply can't complain or really expect much more. Here are the issues I found when installing on my Bridgeport Series 1 2HP: 1. The gear comes pre-greased with some NASTY gooey stuff that you HAVE TO get off completely to properly set the lash... That's just dumb. They need to just put the goo in a little squeeze packet for the user to put on after setup or just skip it altogether and put a note for the user to be sure to grease the gear. How dumb is it to pre-install gelrease that you have to remove/waste? 2. The brass gear was 0.200" too tall for my machine so when I put the original handle back on there weren't enough threads for the nut.... Simple enough to machine it off and definitely better that it was too long than too short! 3. The limit stops are plastic and mine weren't molded "square" so the spring loaded stops were angled away from the table and barely made contact with the switch. Super easy part to make out of aluminum but something that simple should be correct out of the box. 4. No bolts are included to mount the limit switch to the machine. 5. The small bolt intended to attach the plastic cord holder clip under the table to route and secure the limit switch cord is the wrong size (too small diameter) and it already BARELY fits through the plastic clip. I had to get a new larger bolt and corresponding clip. 6. The bracket that mounts to the table has oval holes, presumably to make this more generic and fit more clones. The downside is that the socket head bolts don't have a full and solid seating surface and when tightening you can feel the aluminum giving way under the clamping force. The solution is to use a washer but off the shelf washers didn't fit into the recessed hole so I went to the specialty hardware store and grabbed 4 machine screw washers and they fit (barely). Sanding / turning down the perimeter of regular grade 8 washers would work too. All in all, it is good for the price and the few inconveniences aren't what I would consider a deal breaker. The sad thing is that those inconveniences were 100% avoidable with perhaps a 5 to 10 cent cost increase to the manufacturer.... And if they DID implement those changes it would make this thing worth more simply for time and frustration saved! Heck, I probably wasted $5 worth of acetone and brake cleaner and added 30 minutes to the install getting all the Shmoo off the gearbjust so I could set the lash properly!
0

People Who Viewed This Item Also Viewed

Back to Top
855-385-1880 Monday to Friday, 08:00-17:00, GMT-7; Saturday to Sunday, 08:00 - 15:00, GMT-7 ©2009 - 2022 VEVOR All Rights Reserved