Save up to 15% with PRO price. Sign up for free PRO Account.
About this item
【DURABLE MATERIAL】 - The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and durable and possesses a maximum of 5T (11023 lbs) capacity and long service time.
【ADJUSTABLE JAWS】 - You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool.
【BIDIRECTIONAL OPERATION】 - The 5-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has2" (50 mm) axis travel with 5.5" (140 mm) max reach and 7.9" (200 mm) max spread.
【HUMANIZED DESIGN】 - Equipped with a safety relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility.
【DIVERSE SCENARIO】 - A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc.
【DURABLE MATERIAL】 - The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and durable and possesses a maximum of 5T (11023 lbs) capacity and long service time.
【ADJUSTABLE JAWS】 - You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool.
【BIDIRECTIONAL OPERATION】 - The 5-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has2" (50 mm) axis travel with 5.5" (140 mm) max reach and 7.9" (200 mm) max spread.
【HUMANIZED DESIGN】 - Equipped with a safety relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility.
【DIVERSE SCENARIO】 - A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc.
Rated output: 5 tons
Can work under the temperature from -5ºC~45ºC
Should use (GB443-84) N15 Machinery Oil and working in -20ºC~5ºC
Using the machinery oil must be clean
Able to exchange 2 or 3 jaws freely
Pump head 360° turnable for flexibility
Working Principle Hydraulic puller moves ahead depending on hydraulic mandrill it can make the mandrill unburnable. The claw seat can adjust the distance between progress and reverse. Shaking the handle repeatedly when it is operating, the lever goes ahead, accordingly the claw is back up, finally the object will the pulled out. Using Range Hydraulic puller is one kind of ideal tool which instead of rating Puller. It has the advantage of convenient operation, small volume, working agility, light weights, easy carry, using it would not limited by places. It is suit for factory and some repair sites.
Package Dimension (L x W x H): 17.3" x 12.9" x 4.3" / 44 x 33 x 11 cm
Package Content
1 x Hydraulic Puller
1 x Handle
1 x 2/3 Leg Puller Yoke
3 x Jaws
6 x Link Plates
6 x Screw Sets
Features & Details
【DURABLE MATERIAL】 - The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and durable and possesses a maximum of 5T (11023 lbs) capacity and long service time.
【ADJUSTABLE JAWS】 - You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool.
【BIDIRECTIONAL OPERATION】 - The 5-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has2" (50 mm) axis travel with 5.5" (140 mm) max reach and 7.9" (200 mm) max spread.
【HUMANIZED DESIGN】 - Equipped with a safety relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility.
【DIVERSE SCENARIO】 - A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc.
Rated output: 5 tons
Can work under the temperature from -5ºC~45ºC
Should use (GB443-84) N15 Machinery Oil and working in -20ºC~5ºC
Using the machinery oil must be clean
Able to exchange 2 or 3 jaws freely
Pump head 360° turnable for flexibility
Working Principle Hydraulic puller moves ahead depending on hydraulic mandrill it can make the mandrill unburnable. The claw seat can adjust the distance between progress and reverse. Shaking the handle repeatedly when it is operating, the lever goes ahead, accordingly the claw is back up, finally the object will the pulled out. Using Range Hydraulic puller is one kind of ideal tool which instead of rating Puller. It has the advantage of convenient operation, small volume, working agility, light weights, easy carry, using it would not limited by places. It is suit for factory and some repair sites.
VEVOR Hydraulic Gear Puller, 15 Ton Max Capacity Wheel Bearing Pulling Separator, 2 or 3 Jaws Puller, Vertically and Horizontally, 12" Jaw Hydraulic Puller with Case for Pulling Hubs
I got for pulling propellers of a boat and worked great. The only downside is this thing is way bigger than I imagined so it’s not going to work and any small jobs.
Got stranded in a National Forest with a flat tire and a seazed rim on the truck. After feeding mosquitos for an hour and a half and only with the help of another driver who had two crowbar and penetrant oil were we able to get it off and install the spare. This puller will insure that never happens again!
I'm not here to talk about how much I hate a certain Chevy truck that's in my life. Or how it's not nearly old enough to be the miserable rust bucket that it is. Or how the lower ball joint has never been greased and needed to be replaced. I'm here to talk about the miserable rust-welded axle that wouldn't come out of the hub.
That is until 15 tons of hydraulic force leveled the playing field with ease after nothing else worked.
This tools is heavy, it's awkward, and it's absolutely worth buying if you have an application for it. Because if this is where you've ended up looking you're in a bad situation. This will fix it.
IT HAS NOT HEALD PREASURE FROM DAY ONE AND THEY JUST KEEP WANTING ME TO HIRE SOMEONE TO MAKE A VIDEO OF THAT INSTEAD OF HONORING THERE TOOLS THEY ARE JERKING ME AROUND INSEAD OF JUST REPLACING IT WITH ONE THAT DOES WORK ITS BEEN TWO WEEKS AND NO HELP AND NO TOOL TO DO THE JOB WITH!!!!! THE VIDEO THEY MADE ME USE WAS OF WHAT IT SHOULD HAVE DONE MINE DID NOT!!!!!!!!!!
We are sorry to hear that you had an unpleasant shopping experience.
If the product you purchased has quality problems, please contact the after-sales personnel of our website.
Do not hesitate to contact us if you have any further questions.