It depends on whether it needs to be heated. If it doesn't, it's fine.

It will work great, but, you have to watch the pressure with the knobs. The best way I found is to raise the top roller with the knobs, take two small pieces of the substrate (same thickness as substrate) and put them on each side of the rollers. One on the left and one on the right. Put your substrate and the print ce… see more It will work great, but, you have to watch the pressure with the knobs. The best way I found is to raise the top roller with the knobs, take two small pieces of the substrate (same thickness as substrate) and put them on each side of the rollers. One on the left and one on the right. Put your substrate and the print centered under the roller and lower the top roller. Just make contact with the print and maybe a hair lower. When you roll the print/substrate the two small pieces will roll out. That's fine. Those pieces were just to keep the roller ends from lowering too much. Without those end pieces you are likely to get uneven pressure and bubbles. I hope that hepls. see less It will work great, but, you have to watch the pressure with the knobs. The best way I found is to raise the top roller with the knobs, take two small pieces of the substrate (same thickness as substrate) and put them on each side of the rollers. One on the left and one on the right. Put your substrate and the print centered under the roller and lower the top roller. Just make contact with the print and maybe a hair lower. When you roll the print/substrate the two small pieces will roll out. That's fine. Those pieces were just to keep the roller ends from lowering too much. Without those end pieces you are likely to get uneven pressure and bubbles. I hope that hepls.

Cut the lamination off of the roll, line it up on the print, and then run it through the machine.

Yes. The Manual Cold Roll Laminator can be used for the lamination of printmaking.

The product description states that this is a heavy-duty manual cold laminator suited for commercial and professional use. Its all-metal construction and thick metal materials ensure stability for demanding applications.