Ask about this product by AI
Al-generated from customer reviews







Every pipe in this enclosure is made of galvanized carbon steel, which was chosen because it resists rust caused by water, which can weaken untreated outdoor structures. By adding a zinc coating during galvanization, the steel gains an additional barrier that helps reduce corrosion from moisture and outdoor exposure. That protection helps the frame withstand changing weather, wet seasons, and humid outdoor conditions.
In addition to corrosion resistance, carbon steel provides the strength needed for long-term outdoor use. The pipes retain their cross-sectional shape even when the roof tarp and mesh panels exert constant pressure on them. Thinner pipes can bend over time, but these pipes don't. This material choice creates a strong base that does not require seasonal repairs for a permanent outdoor installation that will serve a flock for many years.
When you drive the ground stakes that come with this large metal walk in chicken coop into the ground at the base of the frame, they hold the structure in place against upward and downward movement. Lightweight containers often shift or tip over due to wind loads, especially when the PE cover adds extra surface area for gusts to hit. Instead of transferring wind loads directly to the frame and potentially damaging the mesh or joints, the stakes transfer them into the ground.
The second thing the design accounts for is snow load. Rather than holding snow, the spire roof sheds it, and anchoring the base keeps the building in place even if snow builds up around the edges. This combination is good for keepers who live in places where winter weather changes often because the enclosure is designed for year-round outdoor use in changing seasonal conditions.
The hexagonal wire mesh that surrounds the entire perimeter is the primary defense against external threats to your flock. Its tight weave and constant tension block potential entry points that predators may target. Zip ties hold each mesh panel to the frame. This keeps the mesh from coming loose under pressure and maintains even coverage, with no visible gaps or edges.
At ground level, where digging predators such as foxes may try to burrow under the edge of the frame, the spiral-wrapped wire around the base provides extra protection. Instead of just using the mesh, the spiral wrapping adds reinforcement where digging pressure is typically greatest. The full-height mesh and strengthened base work together to make a layered perimeter that protects against both above-ground and ground-contact threats.
The door is 6.17 feet tall and 2.12 feet wide, with a full-height opening that makes it easy to walk in. The frame has small gaps along its sides so that small animals and chicks cannot get through openings that do not appear dangerous. Keeping those tolerances small ensures that the door's security matches the mesh around it, rather than creating an easier way in.
Raccoons and foxes will have a much harder time getting the door open with repeated pressure because the extended latches connect deeper into the frame receiver. Large bolts at key connection points throughout the frame keep it from coming loose from vibration and temperature changes.
The PE canopy attaches directly to the spire frame without tools. It can be taken down or moved for the season without disassembling the structure. Polyethylene does not break down when exposed to UV light, does not absorb water, and remains flexible across a wide range of temperatures.
The shape of the spire helps with passive thermal management in addition to its drainage role. As the sun sets in the summer, the peaked center draws warm air up and out through the mesh apex. The steep pitch also keeps light rain off the cover before it soaks through, which makes it last longer. The raised peak makes room above for hanging extra lights or feeders that hang from the ceiling.
This large metal walk in chicken coop has a 9.8 x 9.8-foot square footprint, which provides a proportionally balanced floor area and is well-suited to housing different species. Different animals can live in different corners without being close to each other all the time. Hens, ducks, rabbits, and geese all move in different ways, and the square layout lets them move without having to focus all their attention on a single corridor.
The keeper can walk in fully upright with feed buckets, bedding, or cleaning tools because the door is 6.17 feet high. Open-mesh walls let air flow in from all four sides, which helps reduce humidity and ammonia buildup inside the enclosure.
It comes with ground stakes, zip ties for attaching the mesh panels, and protective gloves. These are all things you need for a clean, safe setup but cannot get while you are putting everything together.
The large metal walk in chicken coop uses an interlocking pole system that allows the frame sections to connect quickly during assembly. Once the frame is up, zip ties and mesh panels make it more rigid. Using the included instructions, two people can set up the entire enclosure in two to three hours, and it will be ready for animals the same day it arrives.