Select the country/region, language, and currency you prefer for shopping.

Mini Split Parts

Price
Under 30
30 ~ 50
50 ~ 100
100 ~ 200
200 ~ 500
500 & Above
Customer Rating
5 stars only
4 stars and up
3 stars and up
2 stars and up
1 star and up
Special Offers
On Sale
Bulk Savings
In Stock
Pickup
Black Friday
VEVOR Mini Split Ground Stand, Adjustable Anti-Vibration Mini Split Stand for 9000-36000 BTU Ductless Air Conditioner Heat Pump, Heavy Duty AC Base Bracket Floor Mount w/ 661LBS Max. Load Capacity
(53)
65.9
62.99
Deal after registering
Member discounted price
0% cash back at checkout.
65.9
Non-PRO Account
65.9
Save
Non-PRO Account
You May Also Like
Recently Viewed

Results for  Mini Split Parts

Mini split parts are the components that connect, support, and protect a ductless heating and cooling system. The core piece is the line set, a pair of insulated copper lines that carries refrigerant between the indoor air handler and the outdoor condenser. Around it sit the supporting parts: copper tubing cut to length, decorative covers that enclose the lines along a wall, and ground stands or pads that raise and steady the outdoor unit. Together these parts move refrigerant, shield it from heat and weather, and hold the equipment firmly in place so the system runs cleanly for years.


The catalog divides into a few main types. Mini split line sets run from 16 to 100 ft, pairing diameters such as 1/4" & 3/8" for smaller systems and 3/8" & 5/8" for larger ones, rated roughly 9,000 to 36,000 BTU. Air conditioner copper pipe supplies ACR-grade tubing for custom runs. Line set covers in 3-inch PVC enclose the lines along a wall, and ground stands plus anti-vibration pads lift the outdoor unit clear of water and debris. Typical uses are new ductless installs, line replacements, and tidying or weatherproofing an existing run.


Four things decide what you need:


  • Line diameter and length: match the OD pair and run distance to your unit's BTU rating, since undersized lines choke refrigerant flow and oversized ones hurt oil return.
  • Fittings: pre-flared ends with brass nuts connect straight to service ports and cut the risk of a leaky field flare.
  • Load and fit: for a stand or pad, check its rated capacity against your condenser's weight and base width before ordering.
  • Environment: covers and outdoor mounts should be UV-stable and corrosion-resistant so sun, snow, and salt air do not break them down.

Browse the full mini split parts range to match your system, or step up to complete mini split air conditioners when you are building from scratch.


Mini Split Parts Types at a Glance


The sub-types differ most in what they do, where they sit in the system, and how they install, so this table lines those up side by side.


Type Primary Role Where It Sits Install Method Selection Note
Line set Carries refrigerant between units Indoor handler to outdoor condenser Flared connections at both service ports Buy the OD pair and length your BTU rating calls for
Copper pipe Raw tubing for a custom line run Along the refrigerant path Cut, bent or brazed on site, then flared Choose when a kitted line set will not fit the route
Line set cover Hides and shields the lines on a wall Over the exterior or interior run Snap-together PVC with corners and elbows Count straight sections and corners for the full run
Ground stand Raises and steadies the outdoor unit Under the condenser, on the ground Adjustable rails, bolted to pad or legs Match rated load to the condenser's weight and width
Anti-vibration pad Dampens movement and lifts off the ground Beneath the condenser feet Set in place, no fasteners needed Pick for a quick base where a tall stand is not needed

VEVOR Mini Split Parts – Line Sets, Ground Stands, Covers & Copper Pipe for Every System


Are you installing a brand-new ductless system or looking for mini split parts to fix an old one? Getting the right parts. The ones that are the right size, have the right rating, and are easy to install. These features determine whether your system works well for years or starts having problems right away. VEVOR's mini split air conditioner parts are designed to meet the needs of both professional HVAC technicians and experienced do-it-yourself installers. Each product line has clear specs and works with a wide range of systems.


Selecting Mini Split Parts by Type and System Compatibility


Before you buy the right mini split parts, you need to know which parts your system needs. Ensure they work with your unit's BTU rating, refrigerant type, and line run length. Using parts that don't fit together properly can cause refrigerant leaks, lost efficiency, and early component failure. VEVOR's clearly defined product range helps you avoid all of these problems right from the start.


Mini Split Line Sets and Line Set Covers for Sizing and System Matching


The mini split line set is the most important part of any ductless system. It uses two insulated copper lines to move refrigerant between the indoor air handler and the outdoor condenser unit. To choose the right line set, make sure the three key factors match your system: line diameter, line length, and insulation thickness. Most mini split line sets come in the most popular diameter pairs, such as 1/4" and 1/2" for smaller systems and 3/8" and 5/8" for larger ones. These pairs can work with systems rated from 9,000 BTU to 36,000 BTU.


The length of the line is also important. You can get line sets in standard lengths ranging from 15 feet to 50 feet. Some models come with pre-flared ends, eliminating the need for field flaring and speeding up installation. Each line set comes with pre-wrapped insulation that is not water absorbent or UV degradable. It keeps the refrigerant temperature stable along the entire length of the run.


Installing a line set and a mini-split line set cover that matches makes the job look clean and professional. Line set covers are made of rigid PVC and come in standard widths of 3 to 4.5 inches. They are the right size to fit the electrical wiring, condensate drain line, and refrigerant lines all inside one raceway. Some line set covers come in white and have painted surfaces. They have straight sections, inside and outside corner joints, and flat elbows, making them a full routing kit for wall-mounted runs.


Air Conditioner Copper Pipe with Grades, Tempers, and Compatibility


Every mini split line set is made of air conditioner copper pipe, and choosing the right grade and temper is important. The air conditioner copper pipe is made from ACR-grade copper, which is dehydrated, cleaned, and capped at the plant. It helps to keep it from getting contaminated inside before it is installed. It is an important difference from plumbing-grade copper, which still contains oils and water that degrade the refrigerant.


You can get copper pipe for mini split systems in two different lengths: soft-drawn coils, which can be bent around objects without fittings. The other straight, hard-drawn lengths are perfect for making straight-line runs. Soft coil choices are available in 25-foot and 50-foot rolls, with diameters ranging from 1/4" to 5/8". Straight sections are usually sold in 20-foot lengths.


When looking for an air conditioner copper pipe for a mini split system, always check the service instructions for the outdoor unit to see which line diameters are recommended based on the BTU capacity. Using pipes that are too small restricts refrigerant flow, reducing system efficiency. Pipes that are too big can cause problems with oil return in the compressor.


Mini Split Ground Stands for Load Rating, Footprint, and Unit Compatibility


A mini split ground stand provides the outdoor condenser unit with a stable, raised mounting platform. It helps keep the unit clear of ground-level debris, snow buildup, and standing water, all of which can accelerate corrosion. Heavy-gauge galvanized or powder-coated steel is used to fabricate mini split ground stands. These stands are corrosion-resistant and can be used outdoors.


Mini split ground stands come with either a single bracket or a full base. Single-bracket models have two parallel rails with width spans that can be adjusted to fit the condenser base. That means they can be used with most home mini-split outdoor units ranging from 9,000 to 36,000 BTU. Full-platform stands have welded corner brackets and built-in bolt-down points for secure anchoring to concrete pads. They have a more enclosed support base for bigger or heavier units.


One of the most important things to check before buying a ground stand is its weight capacity. Standard residential condensers weigh between 55 and 180 pounds. They also have a safe structural margin above the highest load. The stand height from the ground to the base of the unit is usually between 6 and 14 inches. Some models feature adjustable leg levelers that can compensate for uneven ground without a concrete pad.


Matching Mini Split Parts to Your System Size


System capacity drives every part choice, so this table maps each BTU band to the line diameter it needs, the condenser weight a stand must hold, and the one spec worth confirming before you order.


System BTU Band Typical Line OD Pair Condenser Weight to Support Cover Width That Fits What to Confirm First
9,000 to 12,000 BTU 1/4" and 3/8" Roughly 55 to 90 lbs 3-inch raceway Shorter runs often ship pre-flared, so no field flaring tool is needed
18,000 to 24,000 BTU 1/4" and 1/2" Roughly 90 to 130 lbs 3-inch raceway Confirm the drain line and wiring still fit beside the larger line pair
24,000 to 36,000 BTU 3/8" and 5/8" Roughly 130 to 180 lbs 3-inch to 4.5-inch raceway Check the stand's rated load clears the heavier unit with margin to spare
Long or routed runs Match the unit, buy by the coil Varies with the unit chosen Add corners and elbows to suit Measure the full path first; raw copper lets you flare only what you use

Understanding Mini Split Parts by Material and Installation Requirements


The two main factors that set mini split parts that last a decade apart are the quality of the materials used and the ease of installation. VEVOR designs and makes parts that are easier for professionals and do-it-yourself users to assemble.


Material Standards for Mini Split Lines, Copper Pipe, and Outdoor Components


The materials used to make mini split air conditioner parts must withstand high and low temperatures, refrigerant chemicals, UV light, and mechanical stress. Mini split line sets use ACR-grade copper tube surrounded by closed-cell polyethylene foam insulation with walls typically around 3/8 inch thick. It provides both thermal insulation and physical protection against wear and tear where lines go through walls or over surfaces.


Galvanized steel and powder-coated mild steel are the primary materials used for ground stands and bracket systems for outdoor parts. Hot-dip galvanization provides a zinc coating thick enough to prevent rust for 10 to 15 years in typical outdoor settings. Powder coating, on the other hand, adds an extra layer of finish and corrosion resistance for coastal and high-humidity settings.


Mini split line set covers are made of UV-stabilized, stiff PVC that doesn't yellow, crack, or become brittle even when exposed to changing temperatures throughout the year. Standard PVC cracks and fades over time, but UV-stabilized formulations remain strong and retain their color even after years of exposure to full sunlight. That means they last longer than lower-quality raceway materials. All of VEVOR's mini split parts are made from materials chosen to meet or exceed the service life requirements of the mini split systems they are used with.


Installation Considerations with Tools, Techniques, and Time-Saving Features


The overall cost of installing a mini split system and the chance of mistakes that lead to performance issues later are both directly related to how easy the installation is. VEVOR builds installer-friendliness into its mini split parts, reducing the steps, special tools, and field changes needed for a clean, code-compliant installation.


Using pre-flared mini split line sets helps you avoid one of the most common mistakes people make when installing refrigerant lines. Factory flares are made to uniform sizes larger than most field flaring tools can make on the job site. It reduces the likelihood of refrigerant leakage at connection points. VEVOR pre-flared line sets come with brass flare nuts already attached to each end. They are ready to join the indoor and outdoor service ports directly without any extra work.


Ground stands come with anchor bolts and pre-drilled mounting holes, allowing them to be set directly on concrete pads or composite decks. Installers working on multiple units don't need to bring as many tools, since the hardware specifications for the ground stands are the same across all models. Mini split parts include clear fitting instructions and clearly marked components.


Best-Seller Comparison


These are the listings to help you weigh run length, line size, insulation, and what ships in the box before you choose.


Product Type Length Line OD / Coverage Insulation Fittings in Box Best For
Line Set 3/8" & 5/8", 100 ft Insulated line set 100 ft 3/8" and 5/8" PE thickened coil Flared nuts, strapping tapes Largest line pair over the longest run; big 24,000 to 36,000 BTU systems far from the condenser
Line Set 1/4" & 3/8", 100 ft Insulated line set 100 ft 1/4" and 3/8" PE thickened coil Flared nuts, strapping tapes Smallest line pair at full 100 ft length; small systems on a long remote run
Line Set 1/4" & 1/2", 100 ft Insulated line set 100 ft 1/4" and 1/2" PE thickened coil Flared nuts, strapping tapes Mid-size line pair over the longest run; 18,000 to 24,000 BTU units set well back
Line Set 1/4" & 3/8", 50 ft Insulated line set 50 ft 1/4" and 3/8" PE thickened coil Flared nuts, rich fittings Shortest run here with the fullest fittings kit; standard small-system installs
Line Set Cover, 3 in W, 15.8 ft Decorative PVC cover 15.8 ft 3-inch raceway Not applicable 4 straight ducts, full components Only cover in the top five; hides and weatherproofs the finished line run

Shop VEVOR Mini Split Parts for Every System and Installation Need


VEVOR has all the mini split parts you need for an installation. We have heavy-duty ground stands and UV-stable line set covers for ACR-grade air conditioner copper pipe and pre-flared mini split line sets. To make installation easier without sacrificing quality, each part is made from materials that are rated for outdoor and refrigerant-contact service. VEVOR is the best place for HVAC experts and do-it-yourself installers to get parts, thanks to its low prices. Check out the entire selection and buy your mini-split parts now.


FAQs


What line set size do I need for my mini split system?


The line set diameter is determined by your system's BTU capacity. 1/4" and 3/8" lines are usually used for systems up to 18,000 BTU. 3/8" and 5/8" lines are usually used for systems ranging from 24,000 to 36,000 BTU. Check the installation instructions for your outdoor unit to ensure you know the required diameters before you place your order.


Can I use standard plumbing copper pipe for mini split lines?


No, mini-split systems need ACR-grade copper pipe that has been cleaned, dried, and sealed in the plant to prevent contamination. Copper used in standard pipes still contains oil and water that harm the refrigerant and shorten the compressor's lifespan.


Do mini split ground stands fit all condenser units?


Ground stands have adjustable span widths that fit most home condenser base widths of 18 to 28 inches. Before buying, you should always compare the stand's rated capacity to the base measurements and weight of your condenser.


Are line set covers suitable for outdoor installation?


Yes, line set covers are made from UV-stabilized PVC that won't crack, yellow, or become brittle when exposed to the sun for extended periods. That means they can be used for both indoor and outdoor wall-mounted line routing uses.


Are there compatible accessories for mini split systems?


Yes. Beyond line sets, a system can take ground stands and anti-vibration pads, decorative line set covers, and spare flare nuts or fittings. Match each accessory to your unit's BTU rating, condenser weight, and line diameter so everything fits and performs together.


Can you add a mini split to an existing system?


You can add an indoor head to a multi-zone outdoor unit only if that condenser has a spare port and enough spare capacity for the extra zone. Each new head needs its own line set run back to the condenser. A single-zone outdoor unit cannot take a second head.


Where can I buy mini split replacement parts?


You can order replacement line sets, covers, copper pipe, and mounting hardware directly from the mini split parts catalog. Note your unit's BTU rating and existing line diameters first so the replacement matches the original run exactly and connects without adapters.


Can I install a mini split system myself with a kit or should I hire a professional?


Pre-flared line set kits let experienced DIY installers handle much of the mechanical work without flaring tools. However, charging the system, pulling a vacuum, and any work on the refrigerant circuit usually call for a licensed technician, and local codes may require one for the final connection.


Tips & Inspiration