All

Featured items you may like

1.5KWFLDJJBPQZH01V0

1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter

1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter 1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter 1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter 1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter 1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter 1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter 1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter 1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter 1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter 1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter 1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter 1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter
$149.99
149.99
Price including VATSee details
  • · This VFD can be used for constant torque loads ( such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc.). It can be used as a motor speed control and a phase converter. The input for this VFD is 1 or 3 phases as you like. You can control the different speeds as you want when you use this VFD. This item uses Sine wave PWN(SPWM ) for the control system and performance excellently.
  • · 【PRODUCT DETAILS】- The 1.5KW air cooled spindle motor's speed is 8000-24000 R / min, 400 Hz frequency, and less than 0.005 mm run-out off. The 1.5KW variable frequency drive uses PID control, advanced calculates PID closed-loop arithmetic, quick responding speed, and high suitability.
  • · 【PREMIUM QUALITY】- The spindle motor adopts Germany's imported bearing. The VFD inverter single to 3 phase is also made of high-quality material. So both of them have stable performance, easy operation, high quality, less noise and so on.
  • · 【POWERFUL PERFORMANCE】- With powerful anti-jamming capability; With low output ratting torque, low speed running ability; Simple Internal PLC, six multifunctional input terminals, to achieve operation, zero speed, calculator, external exception program instructions and alarm; Auto voltage regulation (AVR) technique, for ensuring the CNC VFD inverter load capability.
  • · 【SAFETY PROTECTION】- Adopts overload protection, fuse protection, over-voltage (DC voltage>400V) or under-voltage (DC voltage<200V) protection, restart protection, stall protection, short-circuit protection and over-heat protection.
 

Frequently Bought Together

People Who Bought This Item Also Bought

1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter
unashoppingifytemplatenew

This item is a high-quality air cooled spindle with stainless steel 304 casing, and Germany made ball bearing. Newly upgraded with adopt Germany imported bearing: three times valuable time than ordinary spindle motor. Speed: 8000-24000 R / min. Run-out off: less than 0.005mm. Power: 1.5KW. ER113.175mm, 4mm, 6mm).

This VFD can be used for constant torque loads ( such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc.). It can be used as a motor speed control and a phase converter. The input for this VFD is 1 or 3 phases as you like. You can control the different speeds as you want when you use this VFD. This item uses Sine wave PWN(SPWM ) for the control system and performance excellently.

  • PRODUCT DETAILS- The 1.5KW air cooled spindle motor's speed is 8000-24000 R / min, 400 Hz frequency, and less than 0.005 mm run-out off. The 1.5KW variable frequency drive uses PID control, advanced calculates PID closed-loop arithmetic, quick responding speed, and high suitability.
  • PREMIUM QUALITY- The spindle motor adopts Germany's imported bearing. The VFD inverter single to 3 phase is also made of high-quality material. So both of them have stable performance, easy operation, high quality, less noise and so on.
  • POWERFUL PERFORMANCE- With powerful anti-jamming capability; With low output ratting torque, low speed running ability; Simple Internal PLC, six multifunctional input terminals, to achieve operation, zero speed, calculator, external exception program instructions and alarm; Auto voltage regulation (AVR) technique, for ensuring the CNC VFD inverter load capability.
  • SAFETY PROTECTION- Adopts overload protection, fuse protection, over-voltage (DC voltage>400V) or under-voltage (DC voltage<200V) protection, restart protection, stall protection, short-circuit protection and over-heat protection.
  • WORKS COOPERATIVELY- The air-cooled spindle, together with variable frequency drive inverter, it's a nice combination to improve the work efficiency and performance of the VFD.
Friendly Note 1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter

The items may be in different stock,so they may be sent separately.

Pls do not worry,you will receive All the parcels in recent days after the order


  •  Product Parameters

The 1.5KW CNC air cooled spindle motor features stable performance and low noise, with 400 Hz frequency. The 1.5KW VFD is 220V input voltage, 208-240VAC output voltage, 48-63 Hz input frequency, 1 or 3 phase input phase,3 phase output phase.

  • Superior Quality

Both of the VFD and high-speed spindle motor use the preferred material to make. They are exquisite in appearance and fine in the craft. The fabulous materials provide them stable performance and great experience of use.

  • Excellent Performance

The PID control technology that uses advanced calculates PID closed-loop arithmetic is applied in the VFD. That gives it quick responding speed as well as high suitability.

  • Single/Three Phase

We provide both single-phase 220V and three-phase 220V input. When used for single-phase, another phase can be used as a spare line.

  • Safety Protection

Adopts overload protection, fuse protection, over-voltage (DC voltage>400V) or under-voltage (DC voltage<200V) protection, restart protection, stall protection, short-circuit protection and over-heat protection.

  • Fast Assemble

All devices needed for installation are provided in the box. The English manual will be provided for the variable frequency drive inverter. VFD spindle is easy and convenient for you to finish a fast assemble.

Technical Parameters for Variable Frequency Drive Inverter
  • Input Voltage: 220 V
  • Output Voltage:208-240 VAC ( analogous to Input Voltage )
  • Input Frequency: 48-63 Hz
  • Output Frequency: 0-400 Hz
  • Input Phase: 1 or 3 phase as you like
  • Output Phase: 3 phase
  • Item Manufacture: From well-known manufacture who manufacture VFD for more than 12 years.
  • Control Mode: SPWM
  • Input Power: 220Vclass:220±15%
  • 5-Digits Display & Status Indicator Lamp: Displaying frequency, current, revolution, voltage, counter, temperature, FOR or REV rotation, and fault, etc.
  • Working Temperature:-10~40 ℃
  • Humidity:0-95% Relative Humidity(without dew)
  • Vibration:Below 0.5G
  • Dimension:22 x 18 x 21 cm (L x W x H)

Technical Parameters for CNC Spindle Air Cooled

  • Spec: φ65x205 mm (Diameter: 65mm x Length:205mm)
  • Power: 1.5 KW
  • Voltage:220V~250V
  • Frequency: 400 Hz
  • Speed:8000-24000 R/min
  • Air Cooling
  • Runout off: less than 0.005mm
  • Grease Lubrication
  • Product Dimension(Approximated): 15"L x 7"W x 7"H 
  • Gross Weight:2.8KG(6.17 lbs)
Package for Variable Frequency Drive Inverter
  • 1 x 1.5KW Variable Frequency Drive Inverter
  • 1 x English Manual

Package for Spindle Motor

  • 1 X 1.5KW Air Cooled Spindle Motor

This item is a high-quality air cooled spindle with stainless steel 304 casing, and Germany made ball bearing. Newly upgraded with adopt Germany imported bearing: three times valuable time than ordinary spindle motor. Speed: 8000-24000 R / min. Run-out off: less than 0.005mm. Power: 1.5KW. ER113.175mm, 4mm, 6mm).

This VFD can be used for constant torque loads ( such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc.). It can be used as a motor speed control and a phase converter. The input for this VFD is 1 or 3 phases as you like. You can control the different speeds as you want when you use this VFD. This item uses Sine wave PWN(SPWM ) for the control system and performance excellently.

  • PRODUCT DETAILS- The 1.5KW air cooled spindle motor's speed is 8000-24000 R / min, 400 Hz frequency, and less than 0.005 mm run-out off. The 1.5KW variable frequency drive uses PID control, advanced calculates PID closed-loop arithmetic, quick responding speed, and high suitability.
  • PREMIUM QUALITY- The spindle motor adopts Germany's imported bearing. The VFD inverter single to 3 phase is also made of high-quality material. So both of them have stable performance, easy operation, high quality, less noise and so on.
  • POWERFUL PERFORMANCE- With powerful anti-jamming capability; With low output ratting torque, low speed running ability; Simple Internal PLC, six multifunctional input terminals, to achieve operation, zero speed, calculator, external exception program instructions and alarm; Auto voltage regulation (AVR) technique, for ensuring the CNC VFD inverter load capability.
  • SAFETY PROTECTION- Adopts overload protection, fuse protection, over-voltage (DC voltage>400V) or under-voltage (DC voltage<200V) protection, restart protection, stall protection, short-circuit protection and over-heat protection.
  • WORKS COOPERATIVELY- The air-cooled spindle, together with variable frequency drive inverter, it's a nice combination to improve the work efficiency and performance of the VFD.
Friendly Note 1.5KW Air cooling Spindle Motor + 1.5KW VFD Variable Frequency Drive Inverter

The items may be in different stock,so they may be sent separately.

Pls do not worry,you will receive All the parcels in recent days after the order


  •  Product Parameters

The 1.5KW CNC air cooled spindle motor features stable performance and low noise, with 400 Hz frequency. The 1.5KW VFD is 220V input voltage, 208-240VAC output voltage, 48-63 Hz input frequency, 1 or 3 phase input phase,3 phase output phase.

  • Superior Quality

Both of the VFD and high-speed spindle motor use the preferred material to make. They are exquisite in appearance and fine in the craft. The fabulous materials provide them stable performance and great experience of use.

  • Excellent Performance

The PID control technology that uses advanced calculates PID closed-loop arithmetic is applied in the VFD. That gives it quick responding speed as well as high suitability.

  • Single/Three Phase

We provide both single-phase 220V and three-phase 220V input. When used for single-phase, another phase can be used as a spare line.

  • Safety Protection

Adopts overload protection, fuse protection, over-voltage (DC voltage>400V) or under-voltage (DC voltage<200V) protection, restart protection, stall protection, short-circuit protection and over-heat protection.

  • Fast Assemble

All devices needed for installation are provided in the box. The English manual will be provided for the variable frequency drive inverter. VFD spindle is easy and convenient for you to finish a fast assemble.

Technical Parameters for Variable Frequency Drive Inverter
  • Input Voltage: 220 V
  • Output Voltage:208-240 VAC ( analogous to Input Voltage )
  • Input Frequency: 48-63 Hz
  • Output Frequency: 0-400 Hz
  • Input Phase: 1 or 3 phase as you like
  • Output Phase: 3 phase
  • Item Manufacture: From well-known manufacture who manufacture VFD for more than 12 years.
  • Control Mode: SPWM
  • Input Power: 220Vclass:220±15%
  • 5-Digits Display & Status Indicator Lamp: Displaying frequency, current, revolution, voltage, counter, temperature, FOR or REV rotation, and fault, etc.
  • Working Temperature:-10~40 ℃
  • Humidity:0-95% Relative Humidity(without dew)
  • Vibration:Below 0.5G
  • Dimension:22 x 18 x 21 cm (L x W x H)

Technical Parameters for CNC Spindle Air Cooled

  • Spec: φ65x205 mm (Diameter: 65mm x Length:205mm)
  • Power: 1.5 KW
  • Voltage:220V~250V
  • Frequency: 400 Hz
  • Speed:8000-24000 R/min
  • Air Cooling
  • Runout off: less than 0.005mm
  • Grease Lubrication
  • Product Dimension(Approximated): 15"L x 7"W x 7"H 
  • Gross Weight:2.8KG(6.17 lbs)
Package for Variable Frequency Drive Inverter
  • 1 x 1.5KW Variable Frequency Drive Inverter
  • 1 x English Manual

Package for Spindle Motor

  • 1 X 1.5KW Air Cooled Spindle Motor

Specification

1 x 1.5KW Variable Frequency Drive Inverter
1 x English Manual
Package for Spindle Motor
1 X 1.5KW Air Cooled Spindle Motor
Questions and Answers
6 Questions
Hello is this 1.5 and control 110v
Hello Philip. The motor is 1.5kw. The inverter is 1.5KW 220V.
By vevor
What is the input voltage?  Is it 110V(120V in NA) or 220V?
Hello Jason!The input voltage is 220V.
By vevor
Is this 120 V? I am looking for a 120V Spindle kit
it is 110V.
By vevor

Customer Reviews

  • 4.8
  • 4.6
  • 4.6
  • 4.7
1 Reviews
murat ozdes murat ozdes
Hello! Have you any draw for this? I need hole dimensions
I also want the drawing you can email it to me the link below no longer works
0

People Who Viewed This Item Also Viewed

Back to Top
855-385-1880 Monday to Friday, 08:00-17:00, GMT-7 ©2009 - 2022 VEVOR All Rights Reserved