Customer Reviews for VEVOR Wire Stripping Peeling Machine Automatic Scrap Cable Stripper 0.1-4.5 mm

This machine is a built like a tank. I pulled it out of the box and had it automating 3 steps in my production process in about 15 minutes. If you just need a cut and strip or half strip operation you don’t even need the manual with the newly designed user interface. It is intuitive for a Chinese built machine, nice work! You can tell they are working hard to provide a good manual but there are a few areas where the translation can still be improved. This machine is worth every penny and feels like it will serve our needs for the foreseeable future. We plan to add additional machines if this one works out. Highly recommended! WC Missouri USA

Great machine. A++ delivery. Thanks

ESL typed owners manual includes information for machine features not on the SWT 508SD, otherwise as I dialed machine in, I was able to refer to the troubleshooting for correcting issues. Purchased to cut and strip wires for harness production. Paid for itself out of the box in labor saved alone.

Very accurate and repeatable, using mostly for 24AWG stranded PTFE, stripped for Molex Microfit & Clikmate / Samtec MiniMate crimp pins, we now have two Vevors

Currently using this to cut 0.047" diameter stainless cable. Has made ~2500 cuts so far. Wish I could get replacement blades for this unit. Customer service was unable to help with that.

Well built machine, Fast shipping. Unfortunately awful manual. Plan on trial and error.

This machine is fantastic. It cuts and strips perfectly and at a speed that is outstanding. The manualmay be a little confusing for some. It's written to cover several models and by a person whose first language doesn't appear to be English. However, it took me less then ten (10) minutes (& 18 inches of wire) for me to figure out the key pad and configure my first set-up of 18Ga. wires for length of wire and a perfect stripping length for amp. sockets. Once setup, it only takes seconds to change strip or wire length parameters. Super simple and very intuitive. And "No" you don't need to be a technical geek or experience with this type of equipment ..... that's coming from an "old geezer" who still uses a Flip Phone. This unit is simple to operate, fast, accurate and costs a fraction of anything else out there.

We received ours with a different control panel than in the image, but it's a better control panel. Now that we've figured out the settings it's doing work that took several hours in several minutes! We actually ordered this one incorrectly as we need the next size up (larger wire), but have now bought that model as well and will keep both. I am having trouble figuring out how to get the machine to remove the jacket instead of just scoring it if anyone has any tips.

This product will accurately and rapidly cut and strip wire up to 10 meters (30 ft) in length. We used it mostly for wire harnesses with wires less than 10 inches long. The length of stripping on the end of the wire can be controlled to the nearest .1 mm which leaves wire the perfect length for the desired contact. The company has stood behind the product.

This is our second machine in the last 8 years or so (lost track) The first one had a failure of the display so we ordered a new one. Once we had the new one, we opened up the old one and found the problem was a simple connection problem and it now works perfect. We are keeping the new one as a backup as we strip and cut miles of wire for our products. Our only complaint is the set up is confusing and the new one is not the same as the old one. A better manual would be helpful so 4 stars.