Customer Reviews for VEVOR Pressure Paint Pot 8 Gallon (30 liters) Pressure Pot Tank Spray Paint Pressure Pot Tank with Manual Mixing Agitator Paint Tank (8Gal 30L Manual)

This was a great buy for staining our fence and shed. Worked great.

I turned this into a pressure pot for resin and it works wonders! No more bubbles.

This is an excellent buy. Great quality and can easily be converted to cast acrylic/epoxy resins for pen blanks. Best value around and well made.KW

This is a solid painting pressure pot. Build quality is excellent. But if you are using it for resin casting, don't go with this one. The fittings are extremely secure and it takes a lot of work to get the necessary pieces off. Testament to its build quality.

tank works as described

take the tube off, change the valve setup on top. make it a pressure chamber for clear casting resin. perfect for what i needed, one extra thing you would need to do is cut out a flat piece to the inside diameter for the bottom since it has a small dip. another thing you can do to make a perfect bottom is get the white resin that sets up fast, pour it in the bottom about 1 inch thick. let it set up and leave it there. if pot is level you will have the perfect bottom. it holds pressure with no drop off in a 24 hour period.

I am using it for resin casting. My husband and I had to use loctite to keep the pressure. It took us three times to figure it out. But, now, it's perfect! Keep at it, if it's leaking, you can do it! PS. How to check for leaks: use a spray bottle with dish soap and water to spray everywhere there's a connection. Pressure it up and wherever there are bubbles, that's your spot to secure.

This is just the right size for my needs of small resin projects. Bottom is round, so had to put a board to make the bottom flat. Just used a scrap piece of plywood. Also cut a silicone mat to fit. I rearranged the fittings on top since I am just using it for a resin pressure pot and not for painting. Works great. Holds pressure for days. Added a second level that doubled the space.

Upgraded from a Harbor Freight pressure pot and this thing is a solid built beast. I would say its as perfect for epoxy casting as anything out there costing less than Binks.

I turned this in to a pressure pot for resin projects. Works fantastically!