VEVOR Electric Pool Heat Pump, 22250 BTU, Pool Heaters for 3171-6605GAL Above and In Ground Pools, Low Noise, Heating and Cooling Highly Efficient & Energy-Saving Pool Water Heater AC120V 60Hz
22.25kBtu/h
Questions and Answers
29 Questions
The pool heater is 220v or 110v?
Can I set up with a heat exchanger so the system can be filled with antifreeze for winter use in a hot tub ?
This depends on your needs. Our maximum water temperature is 40℃. If you want to add a heat exchanger, the water temperature will drop a little. About 35℃. If your required water temperature is 35℃, it is OK.
By vevor
I have 2 tanks full of hot water,ech tank is 2800 leter, is this good to cool down the hot water I have on the tanks? The water on the tanks is about 90 degrees hot!
90 degrees Fahrenheit? If it's 90 degrees Fahrenheit, that's fine, but the coldest it can get is 9°C (48.2°F).
By vevor
I am needing to replace my Rheem heat pump but ideally would like to use the existing Hayward Max-Flo XL pool pump. Is this Vevor product compatible or do I need to purchase a different pool pump? If so, what pool pump is recommended?
This SKU provides a power supply of 110V, 60Hz for the pool pump. It is necessary to check the size and power supply requirements of the Hayward Max-Flo XL pump to determine whether it is suitable.
By vevor
How many cooling BTU’s ? The specs have a heating BTU but not for cooling.
Want to cool approximately 500 insulated gallons to 50-55F on days the temperature is between 75 and 95 with humidity less than 20%..
Thanks
Under the operating conditions of an ambient temperature of 95°F and an inlet water temperature of 55°F, the cooling capacity of this machine is approximately 5.63kBTU/h.
By vevor
