Let's say you need 25hp of power. That is, your load requires 25Hp.
You can buy our three 10HP phase converters.
Use them in parallel one by one as required on our website.
We can meet your 25hp power needs.
We can give you a photo for reference below.
These are our future products, photos taken in our factory.
The photo below is a photo of the future product of XPS.
By vevor
The output can be used for any device.
At the same time, we have integrated the overload air switch of input and output, as well as a large number of indicator lights.
You can use it directly without any other additional things, just connect the input line and the output line.
Although we only have four power versions, our output can be connected in parallel.
What do we mean by parallel?
By vevor
The voltage is 220V level, for example, you input 200V to 260V,
All right.
If the input is 200V, the output is three-phase 200V, and if the input is 260V, the output is three-phase 260V.
If the input frequency is 50 Hz, the output is 50 Hz. If the input is 60 Hz, the output is 60 Hz.
In fact, it is to convert your single-phase electricity into three-phase electricity.
By vevor
You can buy our XPs-10hp
The output of that product is a power supply.
The following is a detailed introduction of XPS.
The product has not yet arrived at the overseas warehouse, so the link has not been launched.
We have four versions of this product, 2.5Hp, 5HP, 7.5Hp, 10hp.
By vevor
Dear Customer, Thanks for your inquiry.
No
The power of the motor and the power of the phase converter must be equal
Moreover, there are strict requirements for a phase converter to run multiple motors
Our XPS, which went online at the end of January, can
By vevor
