From small cold frames to commercial-length hoop buildings, VEVOR's transparent greenhouse films replace aged clear sheeting with brand-new 6 mil polyethylene tailored to your precise structure. Instead of splitting or clouding after a single year, each roll is UV-treated and designed to withstand wind, rain, and multiple seasons. This series gives backyard growers and working farms the same durable 6 mm clear film, whether you need transparent plastic for greenhouse repairs, a full replacement cover, or more material for a new build.
After a long season in the sun, is your clear greenhouse tarp torn, yellowed, or brittle? Degraded plastic stops light from reaching your plants, and a damaged area attracts bugs and cold air. VEVOR's clear greenhouse films are made of UV-resistant 6 mil polyethylene and come in precise roll sizes ranging from small cold-frame patches to extra-long commercial runs. This lets you replace a worn cover or construct a new structure without guessing about coverage.
Matching roll dimensions to your structure is the first step in selecting clear tarp for greenhouse. Next, make sure the thickness fits your climate and budget.
A commercial-length roll isn't necessary for small growth structures, and ordering too much film will leave an inconvenient leftover portion stored in the shed until next season. Once you've anchored and cut, VEVOR's 8 x 25 ft clear greenhouse films and 10 x 25 ft Clear Greenhouse Film sizes fit cold frames, compact raised-bed tunnels, and single-arch hoop houses without extra waste at the corners.
The 16 x 25 ft Polyethylene Film size splits the difference for a mid-size hoop house that a tiny backyard tunnel would soon outgrow, while the 12 x 25 ft Clear Greenhouse Film covers a broader single-bay structure. You are not sacrificing durability for a smaller footprint or a lower price point because all four sizes have the same 6-mil thickness and UV treatment as the bigger rolls.
Because a small tear or a single damaged panel rarely warrants replacing an entire commercial-length cover when a properly sized patch section does the job for a fraction of the cost, these compact clear greenhouse films are also the sensible option for patching a larger structure rather than purchasing a full replacement roll. It's inexpensive insurance against an unexpected storm to have one small roll on hand as backup stock.
Roll width and length matter more when covering a walk-in greenhouse or a full hoop house than for a tiny cold frame. The 20 x 28 ft clear greenhouse film and 15 x 40 ft clear greenhouse film sizes suit typical backyard and small-farm structures. In comparison, the 25 x 40 ft clear greenhouse film and 32 x 25 ft clear greenhouse film sizes suit wider spans or taller hoop houses that require more material to wrap over the frame and anchor at grade.
The 12 x 50 ft Greenhouse Plastic Sheeting dimension, perfect for thin construction that extends well beyond a typical bay without wasting width you won't use, promotes length over breadth for long tunnel houses. With 24 x 50 ft Clear Greenhouse Film and the extra-long 20 x 100 ft Clear Greenhouse Film covering commercial-sized structures in a single continuous stretch rather than several seamed sections, larger enterprises can scale up even further.
Sizing up to cover a building in one piece is typically worth the extra material cost for a permanent or long-season project rather than a short-term or temporary arrangement because fewer seams mean fewer leak points and less labor during installation.
The 6 Mil Polyethylene Film structure used in each roll in this lineup is not an arbitrary thickness. While a considerably thicker film increases expense and shipping weight without providing a commensurate increase in durability for most greenhouse applications and climates, thinner film saves money up front. Still, it shreds more readily in wind and hail.
At 6 mil, clear greenhouse films offer a useful mix: light enough for one or two people to handle, stretch, and secure without specialist equipment or a staff on standby, and thick enough to withstand punctures from branches, hail, or unintentional contact during setup. Fasteners, battens, and wiggle-wire channels sized for standard greenhouse film fit without modification or adapters because this is also the thickness around which most hoop house and cold frame frames are built.
Since two layers of 6 mil film install with about the same hardware and technique as one layer of thicker material would, doubling up a layer of film adds redundancy without requiring you to source a nonstandard thickness if your structure is located in an area that experiences frequent hail or heavy snow loads, all at a lower total material cost. For a normal backyard or small-farm structure, chasing an exceptionally thick specialty film is rarely profitable.
Instead of ordering to the exact frame dimensions and coming up short, measure the full length and width of your frame, then add extra material on each side for anchoring at grade. To keep the film buried, stapled to a baseboard, or fastened with wiggle wire without stretching taut across the frame in a way that encourages tearing, most growers add one to two feet of slack per side.
Because the film must travel up and over the curve on both sides of the arch, an arched construction requires more material than its ground-level length and width alone would imply. Consider the curve of a hoop house in addition to its flat footprint. By measuring along the actual arch with a flexible tape instead of guessing from ground dimensions or a rough estimate, you can avoid ordering too little and having to patch a gap later.
Sizing up is almost always the safer option for clear greenhouse films if your measurements fall between two available sizes. This is because cutting extra material on-site with a utility knife takes minutes, whereas a roll that comes up short requires you to patch a seam or order a second roll mid-project and wait for shipping.
How many seasons your clear greenhouse films last depends on their durability and UV resistance, but size and thickness determine how the film fits your building.
Untreated transparent plastic deteriorates rapidly in the sun, becoming brittle and yellowing in just one season as UV radiation breaks down the polymer chains. Instead, each roll is made of UV-Resistant Greenhouse Plastic, with a UV inhibitor incorporated into the film to stop this breakdown while still letting the light wavelengths plants need for photosynthesis pass through uniformly and clearly across the structure.
Certain sizes of VEVOR's clear greenhouse films have a 4-year UV-resistant rating, which means that, unlike cheap plastic sheeting that frequently needs to be replaced after just one season once summer heat sets in, the film is designed to withstand several full growing seasons of direct sun exposure before clouding or embrittlement becomes a real concern.
This matters for reasons beyond film longevity. Degraded plastic not only looks bad, but it also lets in less usable light, which hinders the growth of the very structure meant to support it, and it is far more prone to tearing during removal or a storm. Genuine UV resistance means fewer mid-season surprises and protects your growing season as much as it protects the material from deterioration.
A High-Toughness Polyethylene Sheet must withstand wind flex, hail impact, and the yearly stretching that comes with seasonal installation and removal in addition to UV treatment. VEVOR's Tear-Resistant Clear Greenhouse Film is designed to withstand tiny punctures that can grow into larger tears, which is typically how greenhouse covers fail in practice rather than through a single catastrophic incident during a storm.
In addition to shedding rain, a weather-resistant polyethylene cover must withstand year-round temperature fluctuations from summer heat to winter frost without becoming rigid and prone to cracking when cold weather arrives. This is also where the Warming Greenhouse Poly Tarp feature comes into play. Unlike leaving a structure uncovered throughout spring and fall, clear film absorbs solar heat during the day and slows its departure at night, extending your growing season on both ends.
Well-made clear greenhouse films do three things at once: they safeguard the structure, the plants within, and your initial investment in the frame, fasteners, and labor that went into making it. These functions include UV stability, tear resistance, and heat retention. Instead of assuming any clear plastic sheet will perform the same way outside, look for that combination by name.
Instead of settling for a generic tarp, VEVOR offers clear greenhouse films in sizes ranging from extra-long commercial runs to small cold-frame patches, all in consistent 6 mil UV-resistant polyethylene. At a cost far lower than custom-cut greenhouse covers, each roll ships ready to install. Replacing a worn cover is a low-risk way to safeguard an entire growing season, backed by VEVOR's warranty and prompt service. Get your greenhouse covered right now by browsing the full lineup.
After determining the length, width, and arch curvature of your frame, add one to two feet on each side for anchoring. Instead of ordering to exact dimensions, round up to the next available size.
Yes, the recommended thickness for hoop houses and cold frames is 6 mil, which balances acceptable weight and puncture resistance. Use two layers instead of thicker film for extra protection in hail-prone areas.
Compared with untreated plastic, many VEVOR clear greenhouse films have a 4-year UV-resistant rating under typical outdoor exposure. Climate and wind exposure affect actual lifespan.
Indeed. Although it is not a replacement for active heating, clear greenhouse film prolongs the growing season on both ends by trapping solar heat during the day and slowing heat loss at night.
The extra material cost for permanent buildings is justified because one continuous roll means fewer seams and fewer potential leak points. For patches or transient cold frames, smaller portions are ideal.
