Electric Chain Hoists
Results for Electric Chain Hoists
Electric chain hoists are motorized lifting units that raise and lower loads on a load chain and hook. This category holds 120V single-phase hoists and three-phase industrial hoists, with single or double chains and wired, wireless or combined remote controls. They hang from a beam, trolley or overhead crane in garages, workshops, warehouses and factories. A motor turns a sprocket that pulls the chain through the body, and a brake holds the load when the button is released. Unlike manual chain hoists, they lift at the push of a button.
Single-phase models run on a standard 120V outlet. The 2200 lbs wired hoist lifts 10 ft at a fixed 29 ft/min, the two-speed dual-chain hoist lifts 2200 lbs to 20 ft at 13.2 or 6.6 ft/min, and the 1100 lbs hoist reaches 20 ft with a 328 ft wireless remote. Three-phase hoists run on 208 to 240V or 440 to 480V and cover 1100 to 11000 lbs, including 6000 lbs double-chain hoists with 30 ft of lift and two speeds. Many models use G100 alloy chain, upper and lower limit switches and an emergency stop. Controls range from a 10 ft wired pendant to a 328 ft wireless remote. Typical uses are engine pulls, machine shops, warehouse racking, assembly lines and loading docks.
Six things decide which one fits:
- Rated capacity: 1100 to 11000 lbs, which must cover the load plus slings and hooks.
- Lifting height: 10, 20 or 30 ft of chain travel.
- Power supply: 120V single-phase or three-phase industrial power.
- Lifting speed: from 6.9 to 29 ft/min, or two speeds.
- Chain system: single or double G100 chain, or carburized steel chain.
- Control: wired pendant, 328 ft wireless remote, or both.
Browse all electric chain hoists to compare models, or step back to the wider engine hoists category.
Electric Chain Hoist Types at a Glance
The table below shows how each type of electric chain hoist on this page works and where it fits best.
| Type | How It Works | Best For |
|---|---|---|
| Single-phase wired hoist | Plugs into a household outlet and runs from a pendant on a cable | Garages and home shops with a fixed lifting spot |
| Wireless and wired single-phase hoist | Adds a handheld wireless remote so the operator can stand clear of the load | Lifts where the operator needs to watch from a distance |
| Two-speed dual-chain hoist | Splits the load over two chain falls and switches between fast and slow lifting | Placing engines or molds where the last inches matter |
| Three-phase industrial hoist | Runs on factory power with a heavier motor and a wireless remote | Warehouses and factories lifting 2 tons or more |
| Heavy-duty double-chain hoist | Double G100 chains share the load, with wired and wireless control | Heavy machinery, dies and steel parts |
VEVOR Electric Chain Hoist – Powerful Lifting for Every Task
In industrial and workshop settings, the ability to move heavy loads efficiently and safely is very important. Do you want an electric hoist solution to make material handling easier while keeping the operator safe? VEVOR electric chain hoists are designed with precision and durability, which consistently give reliable lifting options to factories, warehouses, garages, and construction sites. With a range of electric chain hoists, including 1 ton, 2 ton, and 3 ton models, VEVOR ensures both light- and heavy-duty lifting can be done with ease. High-quality VEVOR electric hoist chains and robust construction also extend the life and performance of chain hoist electric machines, making them indispensable equipment for both professionals and hobbyists.
Types of Products and Scenarios of Use of the VEVOR Electric Chain Hoist
Following are the types and usage scenarios of the VEVOR Electric Chain Hoist
For lighter work: There is a range of various capacities and configurations of VEVOR electric chain hoists to suit various lifting requirements. For lighter work, our 1 ton electric chain hoist provides accurate lifting of equipment, materials, and machinery in garages, workshops, and home-based work. The VEVOR electric hoists feature smooth lifts, strong G100 chains, wired or wireless remote controls, and easy operation, even in tight areas.
For industrial equipment, storage racks, and construction materials: The VEVOR 2 ton electric chain hoist is best when it is needed to lift heavier materials like industrial equipment, storage racks, and construction materials. VEVOR 2-ton chain electric hoists are designed using reinforced frames, robust electric hoist chains, and high-quality brakes to guarantee safety and stability throughout all the lifts. Our VEVOR electric chain hoists enable operators to raise heavy loads without losing control, making them a reliable tool in warehouses, factories, and industrial workshops.
For large equipment and materials: The VEVOR 3 ton electric chain hoist is a heavy-duty lifting project that can work with large equipment and materials. VEVOR electric chain hoists 3 ton feature high-strength electric mechanisms, various speeds, and high safety features, ensuring consistent performance even under harsh conditions. These models offer industrial-grade reliability and sustainability, enabling users to move heavy loads with a high degree of confidence and minimal risk of failure during operations.
For Multiple Applications: The VEVOR electric chain hoists are versatile. Besides the usual workshop and factory applications, they are commonly applied in construction sites, assembly lines, and shipping docks.
For Covenient Integration: VEVOR electric chain hoists integrate seamlessly with overhead cranes, gantries, and other lifting systems, enabling efficient, easy lifting across a wide variety of applications. Ergonomic design, powerful motors, and durable electric hoist chains make VEVOR electric chain hoists efficient and easy to use in a variety of applications.
For Trusted Reliability: It can be a small 1-ton electric chain hoist for handling materials, or a large 3-ton electric chain hoist for lifting industrial materials. VEVOR offers a high-quality, easily installed, and very reliable lifting solution. The VEVOR chain hoist electric devices undergo load capacity, operational safety, and durability tests, making them suitable for professional and personal use.
Matching an Electric Chain Hoist to the Job
Use the table below to match common lifting jobs with the hoist type that suits them and the point to check first.
| Job | Suggested Hoist | Check First | Why It Fits |
|---|---|---|---|
| Engine pull in a home garage | 2200 lbs single-phase wired hoist | Beam or gantry rated above the load | Runs on a standard 120V outlet and lifts 10 ft at 29 ft/min |
| Lifting to a high mezzanine or loft | 2200 lbs hoist with 20 ft of lift | Measure hook travel from beam to floor | 20 ft of hook travel reaches the upper level |
| Precise placement of molds or engines | Two-speed dual-chain hoist | Slow speed for the final inches | Switches between 13.2 and 6.6 ft/min for fine control |
| Warehouse racking and pallets | 4400 lbs three-phase hoist | Three-phase supply at the site, matched to the hoist's voltage version | 4400 lbs capacity with a 328 ft wireless remote |
| Heavy machinery in a factory | 6000 lbs double-chain hoist | Crane and trolley rated above the load plus rigging | Double G100 chains share loads up to 6000 lbs, with 30 ft of lift |
| Frequent light lifts on an assembly line | 1100 lbs single-phase hoist | Duty cycle and lifts per hour | 1100 lbs capacity with 20 ft of lift for small parts |
Care & Maintenance of the VEVOR Electric Chain Hoist
The following steps will help maintain the VEVOR Electric Chain Hoist for longevity.
Inspection: To be long-lasting and to perform effectively, it is necessary to maintain the VEVOR electric chain hoist. Frequent check-ups on the electric hoist chain, motor parts, and load hooks ensure that they are not worn and that the operation is smooth. VEVOR electric chain hoist is constructed with simple-to-reach chains and gear systems that are lubricated and enable easy maintenance without disassembly.
Lubrication: Lubricating the VEVOR electric chain hoist's chains and gears reduces friction and wear, ensuring smooth operation. Lubricants recommended by the manufacturer also ensure that the hoist operates effectively in the long run.
Storage: Our hoist electrical models should be stored in dry, clean areas to prevent corrosion and extend their lifespan. To maintain the hoists, avoid keeping them in wet places or on the ground.
Safety: Safety is a major issue when using a 1 ton electric chain hoist, a 2 ton electric chain hoist, or a 3 ton electric chain hoist. Before use, operators should check load limits, chains, hooks, and remote controls. The VEVOR chain hoist electric models have overload protection and emergency stops to protect the operators and materials.
Proper maintenance and safe operation, as guided by manufacturers, lead to stable, reliable performance of electric chain hoists throughout years of industrial or personal service.
Best-Seller Comparison
Compare the five best-selling electric chain hoists below by rated capacity, lifting height, lifting speed, chain system, power supply and control.
| Product | Rated Capacity | Lifting Height | Lifting Speed | Chain System | Power Supply | Control |
|---|---|---|---|---|---|---|
| VEVOR Electric Chain Hoist, 2200 lbs, 10 ft, G100 (Model BLH10) | 2200 lbs (1 ton), on a single chain | 10 ft (3 m), same lift as the H10 wired model | 29 ft/min fixed, the fastest here | Single G100 alloy chain, upper and lower limit switches | 120V single-phase, IP54 motor with cooling fan | 10 ft wired pendant with emergency stop |
| VEVOR Electric Chain Hoist, 2200 lbs, 10 ft, Wired (Model H10) | 2200 lbs (1 ton), on a carburized chain | 10 ft (3 m), for standard garage ceilings | 6.9 ft/min fixed, tied for the slowest single speed here | DT carburized chain, 0.25 in, with an electromagnetic brake | 120V single-phase, 1000 W copper motor, IP54 | 10 ft wired handle switch with emergency stop |
| VEVOR Electric Chain Hoist, 2200 lbs, 20 ft, Wireless and Wired (Model H10) | 2200 lbs (1 ton), with 20 ft of lift | 20 ft (6 m), double the reach of the 10 ft model | 6.9 ft/min, with an ED25% duty cycle per VEVOR's Q&A | DT carburized chain, 0.25 in, with an electromagnetic brake | 120V single-phase, 1000 W copper motor, IP54 | 328 ft wireless remote plus a 15 ft wired control |
| VEVOR Electric Chain Hoist, 2200 lbs, 20 ft, Two-Speed (Model BLH10) | 2200 lbs (1 ton), split over two chains | 20 ft (6 m), on a dual-chain system | Two speeds: 13.2 ft/min fast, 6.6 ft/min slow | Dual G100 alloy chains, upper and lower limit switches | 120V single-phase, IP54 motor with cooling fan | 15 ft wired pendant with emergency stop |
| VEVOR Electric Chain Hoist, 4400 lbs, 20 ft, Three-Phase (Model HHBB-2T) | 4400 lbs (2 tons), the highest here | 20 ft (6 m) for warehouse and factory beams | 21.6 ft/min fixed under double the load | Single G100 alloy chain, upper and lower limit switches | Three-phase, in 208 to 240V and 440 to 480V versions, IP55 motor, the only three-phase unit here | 328 ft wireless remote with emergency stop |
Strong Lifting Made Simple using VEVOR Electric Chain Hoists.
VEVOR electric chain hoists provide workshop, warehouse, construction, and industrial lifting solutions. Whether it is light -weight electric chain hoists of 1 ton, middle weight of 2 ton and 3 ton electric chain hoist models, each hoist electric model offers precision, durability, and safety. VEVOR chain hoist electric devices are easy to use and offer lots of possibilities to the material manipulation and increase the productivity with strong chains of electric hoists, easiness of its work, and the ability to combine it with overhead cranes.
Frequently Asked Questions
What are the main features of Vevor chain hoists?
VEVOR electric chain hoists combine an IP54 or IP55 motor with F-class insulation, alloy steel chain and automatic braking. Many add upper and lower limit switches, a rotating hook, an emergency stop and a 328 ft wireless remote.
How do I choose the right chain hoist for my lifting needs?
Match capacity, lift height, power and speed to the job, sized above the heaviest load. A 2200 lbs 120V hoist covers most shop work, three-phase sites can run a 4400 lbs three-phase hoist, and a 6000 lbs hoist suits 3-ton jobs. Two speeds help careful placement.
What are the main differences between manual and electric 2 ton hoists?
An electric hoist lifts with a motor at the push of a button, while a manual hoist is pulled by hand. Electric models lift faster with less effort and add limit switches and remotes, but they need power and a duty-cycle limit.
How does a 20 ft chain hoist compare to other lifting equipment?
A 20 ft chain hoist gives vertical lift from a fixed point, while engine cranes and jacks give lower lift but roll around. Hoists suit beams, gantries and mezzanines, and the long chain reaches floors far below the mounting point.
What safety precautions should I follow when operating an electric hoist?
Check the chain, hook and brake before every lift, and never exceed the rated load. Keep the chain free of twists, lift straight rather than at an angle, stand where you can see the load and use the emergency stop if anything moves unexpectedly.