VEVOR Shop Stool with Backrest, Pneumatic Garage Seat/Work Stool with 300 lbs Capacity, Adjustable Height Roller Creeper Seat, 360° Swivel Padded Workshop Stool, for Garage, Shop & Auto Repair, Black

Heavy-Duty 300-Pound Weight Capacity with Reinforced Carbon Steel Frame

The VEVOR shop stool with backrest features a strong carbon steel frame and reinforced screws, can hold up to 300 pounds, and remains sturdy even with long-term use. The heavy-duty design helps the stool maintain its shape under repeated loads. In normal use, the safe center of gravity design keeps the stool standing straight and prevents tipping.

The high-strength steel design makes it strong enough to hold a lot of weight and last longer than most workshop stools. Even with the raised seat design that puts users at the optimal working height, the wider, thicker base makes the whole thing more stable and reduces the risk of tipping.

Precision Height Adjustment Between 40.6-44.9 Inches with Pneumatic Cylinder

The sturdy gas cylinder lets you easily and quietly change the height from 40.6 to 44.9 inches (1030-1140 mm) above the ground. This lets you find the best height for your work without bending or hunching. The pneumatic system can hold a lot of weight and lasts a long time. It resists aging through thousands of adjustment cycles.

The 4.3-inch adjustment range works with a variety of work areas and user heights, and the pneumatic rod maintains a consistent level without settling or drifting over time. The silent operation makes sure that changes will not disrupt workshop environments or require stopping work that is already in progress.

Ergonomic Shop Stool with Backrest Delivers Superior Lumbar Support

The high, soft backrest provides your lower back with the support it needs and relieves pressure, especially helpful at work, where you sit for long periods. The ergonomic chair keeps your back straight while you work, helping you avoid fatigue and discomfort from prolonged sitting in a workshop.

This shop stool with backrest specifically addresses ergonomic challenges where workers spend hours performing detailed tasks. The backrest follows the natural curve of the spine to provide consistent support that helps prevent the strain that comes with sitting without a back while doing precise work.

Complete 360-Degree Rotation with Pearl Cotton Cushion Comfort

While you work, the thick pearl cotton cushion on the workbench stool can rotate 360 degrees, providing your hips with soft support. The smooth rotation lets you reach tools and work areas from any direction without moving the stool base. This makes work more efficient and reduces physical strain when moving from one place to another.

The pearl cotton cushion provides extended comfort during rotational movements, and the bearing system can handle up to 300 pounds without binding or resistance. Because the frame is stable and the foot pads do not slip, the seat stays in place even when you pivot in all directions.

Waterproof Shop Stool with Backrest Features PU Synthetic Leather Surface

The big, soft pearl cotton cushion features a PU synthetic leather surface that is water-resistant and oil-resistant, so you can work for long hours while sitting. The non-porous surface resists workshop chemicals, lubricants, and cleaning solvents while remaining easy to wipe clean with standard cloths, making it ideal for garage, roadside, and indoor/outdoor repair and cleaning tasks.

Through repeated exposure to oils, fluids, and cleaning processes common in industrial and automotive settings, the PU surface construction maintains its appearance and feel. Contaminants that could make you sick or leave lasting stains can not get through because the material is waterproof.

Anti-Slip Foot Pads with Enhanced Stability Base Design

The anti slip foot pads keep you in place on smooth concrete floors, and the stable frame keeps the seat steady while you use it. The wider, thicker base design makes the seat more stable overall, so it will not tip over even when users lean forward or apply side forces while working.

The design of the foot pads spreads the 15.0 lb stool's weight over a larger contact area. This keeps the stool's grip on dusty or slightly dirty surfaces that are common in workshops without scratching the floor. The stable base design keeps the user in place during long work sessions.

Compact 18.9 x 18.9 Inch Base with Professional Workshop Applications

The efficient base measurements of 18.9 x 18.9 inches (480 x 480 mm) provide good stability while keeping a small footprint, ideal for a busy workshop. The height range is 40.6-44.9 inches, which is typical for workbenches. The total weight of 15.0 pounds includes all the accessories you need to use it fully.

The dimensions of this shop stool with backrest make it ideal for car repair, electronics assembly, machining, and maintenance tasks where sitting down improves accuracy, and the small base allows it to easily move between tools and workstations without getting in the way.

Silent Pneumatic Operation with Long-Term Durability Engineering

The high-quality pneumatic cylinder makes height changes smooth and quiet, and it will continue to hold a lot of weight for a long time. Unlike hydraulic alternatives, the internal parts are designed to resist wear and continue to work well even after thousands of height changes.

The pneumatic system does not use fluids that can leak or require servicing. The gas cylinder technology responds quickly to height adjustments and stays in place even when fully loaded, so it does not settle over time.