VEVOR Range Backsplash with Shelf 29.5 x 29.5 Inch Range Hood Wall Shield, Stainless Steel Backsplash Silver Splash Plate for Range Hood Stainless Backsplash with Storage Shelf and Hanging Rack

It came wrapped front and back for protection and it was a pain in the butt to pull off. Some tips: 1. Got this tip from other review, trace a template of it using the box it came in. That way you can hold template up and pre-drill holes in wall and figure out placement 2. pull wrap off across at top, imagine a line, then roll it down in one piece. Figured that out by the time we got to the back. 3. Add both shelves before attaching to wall. Also, the thing is really heavy, it took my husband and I…and we really could have used a third person. That’s why you should do the template first to save your arms. Truth be told we are not “handy” people, so maybe to a person who is use to constructing things, it will go faster for you. We have a Samsung Induction Stove and it matched perfectly, same with the shelves it came with. I would recommend this product, the work is worth the look. PS - we didn’t want the big yellow Vevor sticker on the front - use a razor blade scraper to remove it and goo gone to remove any residue.

Arrived damaged. I emailed to see what we could. First respnse was just odd telling me to check neighbors houses that it shows deivered... i sent photos of a damaged product im positive it was delivered lmao. Then I reply and am told in 1-3 days there technician will get back to me... for a bent peice of sheet metal? a tad confusing I must say it's not a piece of broken down heavy equipment it's bent stainless sheet metal. For all the good positive experiences friends have had this is just a flat out horrible first experience for me to say the least

I procrastinated for years about a backsplash because I wanted something that was functional, flexible and reasonably priced! I now have it and very happy with purchase!!! Couple things would have made it an even better purchase experience; first it should come with screws that are large/long enough to anchor into a wall (those provided were too short and gold in color) so had to make a trip to the hardware store for stainless steel screws, and second, it would be nice if there was an option for a trim kit to cover the top and bottom mounting strips as it looks slightly "unfinished" as is IMO. However, we already have a solution and I will post a photo update when its completed.

Heavy sucker! We elected to use toggle screw mounts to attach to wall as no studs that would line up. Wrapped very nicely with plastic to avoid scratches. Tried to cancel order less than 1/2 hr. After ordering but seller denied so be mindful of that. Have concern into seller as the shelf ledge (hard to see on pic) is turned up revealing the burnished backside of the chrome and is not as shiny as the rest of the unit. Will see what their response to this is. Found package to be secure and sandwiched between styrofoam which kitty enjoyed scratching on. Would we recommend… Yes, but it’s a 2 person install. We used the cardboard packing and made a template to show the screw holes and placement on the wall as we had to “jimmy rig” it between 2 existing cupboards and a vented range hood.

Was the perfect fit for our high end kitchen. Very well built and heavy. Love the commercial look

I assumed it was magnetic and it is not. I specifically wanted it for my spices:(

This was perfect for my new commercial gas range. It measured exactly to the specifications and it much thicker than I expected. It is actually 2 layers of stainless steel with some insulation in-between. The back side of the unit is smooth in case you don't want shelves. Both sides of the unit come with protective plastic to ensure the unit doesn't get scratched when mounting, and a lot of care taken in the shipping box to protect the unit. To mount the unit into the wall studs, I did have to drill a couple of new holes in the panel, and the mounting areas on top and bottom are heavy duty and easy to drill through. This backsplash is a great value for the cost and you can't go wrong.

make out of thick stainless steel. very fast shipping. Vevor seems like a good company, Will do business with from now. .....

Few screws stripped or defective. One bent and is still stuck, can't remove it or screw it all the way in. The hanging rod was too short. The side braces bent when installed thin short rod. So I left it off. Cleans well though...and CAN'T BEAT that price. Is very thick and heavy. Much better than a homey depot one that was twice as much (got returned). Could use some improvements...but pretty great otherwise. ( Also removed that sticker in corner.) Looks great!

Wow- this was perfect solution for me! I needed a new backsplahs once I got a new stove and range hood- i wasnt sure I wanted tile and wanted something easy to clean! It was so easy to put up and looks like a chefs kitchen now. I love the little shelf for decor! I have a low clearance so a lot of the piece is behind the stove but it still looks awesome!