Customer Reviews for VEVOR Precision Miter Gauge, 24" Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max. Stock Support and a Repetitive Cut Flip Stop, Miter Saw Fence w/Laser Marking Scale

I actually own both the 24” and the 17” Miter gauges and use one with a table saw and the other with the band saw. These are VERY WELL crafted. I was impressed when I was unboxing, how well packaged, labeled the box is. There were some earlier reviews of people complaining that the blue knob was missing and one reviewer mentioned it was under and inside the foam. Well now there’s a. Cut out and a label stating what’s there. The materials themselves are of very good quality aluminum, no rough edges or rough spots. All is there, there is a manual with some information. Why is not very detailed is how to install or put together but it is pretty self explanatory. In case it’s not for you, look at the pictures I’m posting where you can see what goes where. I checked the squareness of the gauge and it’s 100% square. This thing is really great. I made several cuts and they were also cleverly square. All in all, these are wonderful pieces of equipment and will last a very long time. Besides the price vs what you get it’s really amazing! Thanks for making such a great product!!

First let me say that the only thing I can compare this to is every table saw miter gage that came with all my table saws that I've ever purchased, and there has been many over my 58 yrs. That being said, this is the nicest miter gage I've ever had. This is worth every penny. It's adjustable and tunable to any saw with a 3/4" wide miter slot. The inch markings are pretty much useless, though accurate, I always use the miter gage in the left slot, so the numbers count the wrong way for me, but that's really not an issue for me. I always measure to the blade to my fence or stop, I never rely on the fence markings or those on my miter gage. It's very accurate as far as I can tell. The angle marker is adjustable plus or minus 2 degrees. The key is making sure that your miter slot is perfectly parallel to the blade. Don't blame the miter gage if your slot isn't parrallel to the blade.Did that first! It's very well made and nicely machined piece of equipment. I'm very happy with this miter gage. Worth every penny. Great value.

I have looked around quite a bit trying to find the most economical yet accurate mitre gauge for my shop. I'm so glad i went with this gauge. It is very sturdy and has a lot of the features that other much higher priced gauges have. Easy to put together. My only problem was that the keeper pin doesn't want to screw in easily on the 0 degree mark but other than that this is a solid piece.

It was ok, I was expecting more from the reviews I read. It seems like it will do the job but seems over priced

I can't get the width adjustment to hold. Steel roller keeps loosening up when I use it. Works for a few cuts and then i need to adjust it again. I pretty much don't use it anymore.

I like it ����

This is a good quality mitre gauge and fits a t-type mitre track. It rides smoothly in the track after some adjustments. The fence and mitre bar are accurate and straight aluminum. The angles are accurate.It would have been better to have adjustable knobs on the fence instead of a hex screw but a trip to hardware store easily remedies this. Took a star off for the positive stop brass screw. It is a screw in and not a spring lock as per the (measly) instructions. To top it off the brass screw doesn't align well enough to screw in when the head is attached with the bolt and nut. It's close but no cigar. It's off by about 1/64 inch, just enough to not work. Frustrating to be sure. I was going to take two stars off but it is quality for a good price.

For this money this tool is quite impressive. Nicely machined and anodized. Similar tools from known brands cost 2-3 times as much

Really accurate adjustments. Great workmanship.It did arrive without one adjustment screw and the instruction sheet was poor, but I really didn’t need either.

Shipped in a well-engineered double box, with quality foam inserts. I thought again about the price point of this tooling. And I started to think that a mistake had been made. But re-reading the add I realized that this was the correct piece and really a (currently), "Underpriced" gem! (At $45)! The locating surfaces were, "I believe", (Finish ground) before a hard anodized surface was applied. Resulting in a very true, "And VERY flat" surface with which to work. I admired each part as I initially unboxed this beautiful piece! No directions, But I did not need any. And the few minutes it took me to fully assemble, allowed me to acquaint myself with this Mitre-Tool. This design was very well thought out. And it has several features which others, "Some costing more than three times as much" didn't think to add. Features that will be used to. And NOT, "Gimmicks"!No cheap, thin or flimsy materials were used here. Everything fits and works as it should. And simply it's heft is substantial. And it was easily adjusted for movements which reminded this one of my old "Swiss Micrometer sets"! This, in the perfect and easy way that "all" the parts of this worked in concert together!The radial gauge has easily read, and very "Deep" engraving. Which "Glides" through its scope of indexing. And they included a "Brass Knurled" nut for the locking of standard angle sets. And also, a very large (and hence), very easy to use "manual adjusting", "Knurled aluminum lock" for angles not so common. And as needed. This really is a "Class A - Journeyman", (Machinist Grade Tool)"!I could go on and on about this as an old "Tool & Die" making fellow. But I'll simply finish with this...You will be very happy with this purchase. And you would have at "Double" it's current price point too! "Period"! Good Luck! Don B. Astupid