Customer Reviews for VEVOR Sewing Machine Servo Motor, 550W 110V 4500rpm Brushless Servo Motor with Needle Positioner Energy Saving

Removed old motor on my Brother 755 industrial to slow it down and make it more manageable for canvas work, Had my machine up and running in an hour. Fit perfectly with appropriate adjustment of the provided motor bracket. Manual is crappy but You Tube is your friend.You will likely need a new belt. Easy purchase at the auto store.I happened to have a spare belt at home which fits nicely. Funny story, The belt was used on my Yanmar diesel in my sailboat for my old Hitachi alternator. Coincidentally the boat is where all my canvas work is going.Sweet!

How can a tiny 5lb 750W servo motor possibly be more powerful than a 45lb 450W motor that came with my sewing machine? I don't know but it is 100% definitely stronger, and the install took 10 minutes, just had to remove 3 bolts, pop off old motor, then put on new motor using the same holes, and using the included bolts. Super easy. This thing is probably going to last about 5 years, so for the cost, I will definitely just replace it if it breaks.

This server motor worked out excellent for my Chinese shoe patcher sewing machine. I would like to mention installing it on a homemade plywood bench was very easy making a pedal was also very easy. It has more than enough power to sew through leather and other heavy materials with this Chinese Shoe patcher sewing machine combined there in outstanding value. Viborg in my neighborhood gives excellent customer service the shipping is very fast and anytime I had to contact them via email I received a response within at least a day. The other products that I have had to contact them about most of the issues were my fault however they were very eager to take care of my issues and sort things out politely and quickly thank you Vevorfor for your excellent customer service.

I have an industrial sewing machine. I can't believe how much easier this setup makes sewing stuff. It bolts up amd is universal as long as your setup is the industrial type. I have a singer table with a nakajima machine. I did have to get a belt (I just went to autozone) but it took about a half hour start to finish for the conversion. So much smoother and more controllable now.

This thing is so easy to use and install. I made my own leather belt for it and it’s so smooth and quiet and very powerful!

This was a great improvement to a great Consew sewing Machine. This addition makes that machine handle like a dream, I was able to dial down the speed and set the needle to come up when stopped. The RPM adjustment was worth the money for me.

Servo motor has way better control over the speed of the machine compared to a clutch motor!

Bolts right in place of the heavy old clutch motor. Everything provided in the kit. I swapped pulleys to the smaller one (included). Lot's of confusion on speed in the various reviews. Speed is either off or 400 and up. Unfortunately it won't crawl at 100 or 200. The starting speed is a brisk 400 rpm and can increase as you press farther down on the pedal. The speed setting is the limit only. Set it for 1000 and it will go from 0 to 400 then increase up to the 1000 max you set. Otherwise it works great and a huge improvement I should have done earlier.

Easy to control the sewing machine with the very responsive motor.

I like the power and the low noise, for me was very easy to installI would like it start with very low rpm to do slower stitching to have better control