Customer Reviews for VEVOR Jointers Woodworking 8 Inch Benchtop Jointer 1500W Jointer Planer Heavy Duty 9000 RPM/min Benchtop Planer 6M/min 120 mm Cutting Thickness Wood Jointer Benchtop For Wood Cutting Planer

This little jointer works great! Mine wasn't perfectly adjusted out of the box but it's totally adjustable and can be dialed in exactly right. Once it's right it stays that way. The only thing I could add it that they need to have replacement blades available and they don't. I found a company on ebay that will be making blades for this soon, so hopefully that won't be an issue. Some people complained about the surface being to rough but it's a simple fix, 320 grit paper on a orbital sander for just a few minutes and some Teflon spray and it's smooth as can be. I'm glad I bought this and recommend it to anyone looking for a small jointer.

The only bad thing I have to say is that the feed tables are milled pretty rough and oriented such that it's difficult to push wood through.Otherwise I've been using it for about a week and I can say+ dust collection works well with a shop vac and adaptor+ stable once it's bolted down (comes with rubber grommets for vibration reduction)+ seems like you can feed relatively quickly and still get a good finish- the fence isn't particularly impressive but you can set it up with a square and tighten it pretty well so it isn't a problemPretty hard to beat the price!

good stuff

First off, the Jointer/Planer is Heavy, it does a good job on both it's not a $5000.00 one, but it will work & do a nice job, 1 Con thou is the dust chute You have to put it in the one Your not using so the idea here is do what You have to on the Jointer then when your done with the Jointer then You can move to the planer but if You dont then you will be changing the dust chute Each TIME.

I need a belt for a mb5015 bench jointer

I found the planer jointer to be more than adequate for what I use it for it's a good piece of equipment and I would recommend you being bought by someone else

Received the other day and went to put it together half the legs are missing the hardware had been opened and half missing. Then I went to turn machine on and it wouldn't even come on. JUNK!

did storm shutters on the house to use during bad weather here on the Gulf Coast... Got the jointer just for this project cause I wanted to try it out before I got a planner. using 1 x 4 x 50" and ran 2 lite passes on all 4 sides, lite sanding and stained all 4 sides. really looked good and all of the slats with the milled finished really set them off great. I was satisfied with the jointer and am glad I got it. I do plan on getting planner for a few other projects. Just a hobby for me, not in it for the money.

Very good jointer for the price. I would recommend this to someone else who is looking for a reliable but cost-effective tool.