Customer Reviews for VEVOR 10x2inch Belt Grinder Rubber Wheel Serrated Rubber Contact Wheel 6206 Bearing Belt Grinder Wheel for 2x72inch Knife Making Grinder

Being used on belt sander/grinder, love the performance, the serrated wheel not as Hot as a solid wheel, thanks

Using this as an upgraded item on a belt sander that I'm building.

Good product

I built a 2x72” grinder from a design I came across on the internet. I chose to build the flat platen as it was part of the original design and it all worked well beyond my expectations. I added a 10” contact wheel which is a more efficient setup as it eliminates the loss of power due to friction between the back of the belt and the platen. I chose the happybuy wheel, turned a 30mm shaft for it and couldn't be happier. It is well balanced and perfectly aligned. A quality product.

Using this as an upgraded item on a belt sander that I'm building.

Runs true and very quiet. Cuts even and smooth. I’m impressed and will buy more sizes. I had to turn a custom 30mm x 1/2” sleeve to mount it, but no biggie.

So far, I really like it. The only dislike is the large shaft/bearing office. There are some YouTube videos how to work with it - going to a machine shop, having a shaft built, etc - I found that Ace Hardware has 1 1/8” x 1/2” bearings that fit perfectly. They drop in on each side, use a 1/2” bolt to connect to the tooling arm, a couple flat washers for alignment and you’re good to go.

I have been using this 12” wheel whic in fact measures out at 11 3/4” but hey who’s counting. It is perfect for my hollow grinds on my recurve Bowie’s. The serration does help keep the belts cooler and it gives me a good blast of air while grinding. The edges come out great for shaping and plunging recassos. Great value for the price but my only complaint is the bearing inner diameter is 1.18”. It is huge so good luck finding a bolt or spacers to fit it. I had one machined.

Perfectly balanced with smooth bearings.

This wheel tracks pretty good. We had checked around for a place to make an axle because the center is 30 mm. Was gonna cost 60 bucks to make. We used a 7/8 socket from harbor freight. 4 bucks 2 colbalt drill bits 22 bucks. Saved some loot. This is the first time that I’m learning to make hollow grinds. Not to bad.