Select the country/region, language, and currency you prefer for shopping.

Plate Compactor

Price
200 ~ 500
500 & Above
Customer Rating
5 stars only
4 stars and up
3 stars and up
2 stars and up
1 star and up
Special Offers
On Sale
Bulk Savings
In Stock
Pickup
Black Friday
Black Friday
VEVOR Plate Compactor, 130W Output Electric Ground Rammer, 5 kN Force, 3.9 in Depth, 16 m/min Speed, 3304 sq.ft/h Efficiency, Gas Powered Soil Compaction Machine for Driveway, Pavement, Landscaping
(34)
379.9
379.9
Deal after registering
Member discounted price
0% cash back at checkout.
379.9
Non-PRO Account
379.9
Save
Non-PRO Account
150 Added to Cart
4.0K+ Views Recently
You May Also Like
Recently Viewed

Results for  Plate Compactor

A plate compactor is a walk-behind ground compaction machine that uses a heavy, flat steel base plate driven by an engine or motor to deliver rapid downward vibration. As the plate strikes the ground many times per minute, it forces air and moisture out of loose material and presses the particles tightly together. The result is a firm, level, load-bearing surface that resists shifting and settling. Operators guide the machine forward across the area while the vibrating plate does the work, pass after pass, until the ground reaches the density the project requires.


Most units fall into a few clear types that span a wide performance range. Electric plate compactors run around 130W with roughly 5 kN of force and about 3.9 in of compaction depth for quiet, fume-free work, while gas plate compactors scale from light 2.8 HP (98CC) units up to heavy 7 HP (196CC) machines generating 1,920 to 4,440 lbs of compaction force, with plate sizes from 18.7 x 11.8 in to 23 x 18 in and vibration speeds near 5,250 to 5,700 VPM. Typical uses are patios, walkways, garden edging, driveways, asphalt patch repairs, paver bases, and structural foundation preparation.


Five things decide what you need:


  • Power source: choose electric for indoor or noise-sensitive areas with mains access, and gas where runtime and force matter more than quiet.
  • Compaction force: light soil and sand need less, while gravel, clay, and asphalt need higher force to reach a stable depth.
  • Plate size: a larger plate covers more ground per pass, a smaller plate turns tighter around corners and paver joints.
  • Compaction depth: surface landscaping needs shallow compaction, road bases and foundations need to go deeper so they do not settle.
  • Portability: wheel kits and lighter frames decide how easily the machine moves between job sites and fits in a vehicle.

Compare the full lineup of plate compactors to match force, plate size, and power source to your surface, or browse the complete compaction equipment range to find the model that fits both the project and the budget.


Plate Compactor Types at a Glance


The five families on this page separate most clearly by how they are powered, how hard they hit, and how much ground each plate covers, summarized below.


Type / Sub-type Power Source Compaction Force Plate Size Buyer Note
Electric compactor 130W electric motor 5 kN (approx. 1,125 lbs) Compact steel plate, 3.9 in depth Pick when fumes and noise rule out gas, and mains power is on hand
Light gas compactor 2.8 HP / 98CC gas 1,920 lbs 18.7 x 11.8 in Maneuvers tight residential detail work the bigger plates cannot
Balanced gas compactor 6.5 HP / 196CC gas 2,360 lbs 20.1 x 15 in The all-rounder for patios, foundations, and asphalt patches
High-force gas compactor 6.5 HP / 196CC gas 4,047 lbs 21 x 16 in More ground impact for gravel roads and soil-based foundations
Heavy-duty gas compactor 7 HP / 196CC gas 4,440 lbs 23 x 18 in Reserved for large open foundation and road-work surfaces

High-Performance Plate Compactors For Soil, Asphalt, And Landscaping Projects


Doing a driveway, patio, or a foundation requires a solid foundation that is permanent? VEVOR Plate compactors are used to fix uneven ground, loose soil, and unstable surfaces within a short time and with precision. This division includes machines that are designed to compress sand, gravel, soil, and asphalt in a cost-effective manner.


High-performance plate compactor for sale provides dependable compaction to undertake soil, asphalt, and landscaping works, which guarantees to provide high-quality foundations, smooth surfaces, enhanced stability, and durability of outcomes in residential, commercial, and construction work.


These compactors are applicable in either backyard DIY projects or construction work that requires serious effort: the vibration strength, movement, and predictability are consistent in any ground environment.


Types of Plate Compactors and Their Best Applications


Where a stable, level base is required prior to paving with pavers, asphalt, or foundations, plate compactors are used. The type of model to choose depends on the power source, the size of the plates, and the actual compaction force needed.


Electric Compactors for Quiet Residential Use


An electric compactor is the cleanest and quietest option for homeowners and do-it-yourselfers in noise-sensitive areas. The 130W electric plate compactor has a compaction force of 5 kN (1,125 lbs) and compaction depth of up to 3.9 inches, ideal for garden paths, patios, and walkway preparation. It has no fumes and no noise, and its steel base plate applies even pressure on sand, soil, and small aggregates.


Light Gas Compactors for Patios and Garden Projects


The mid-size gas models can be used for larger residential paving and landscaping jobs where an electric unit would not generate enough power. The 2.8HP 98CC gas plate compactor is a combination of regulated vibration and an effective plate area that compacts soil and asphalt evenly and uniformly on home paving, garden edging, and minor construction jobs.


Mid-Range Gas Compactors for Driveways and Repairs


A larger gas-powered plate would be used where more coverage of plates and consistent engine performance is required, such as driveway, walkway, and road patch repairs. A 6.5HP 196CC gas plate compactor compacts gravel and heavy soil surfaces efficiently, has a 22.1 x 15.9 in plate and a wheel to transport the machine easily from job site to job site, and a stamped plate that provides better compaction coverage per pass.


Balanced Power Models for Home and Commercial Use


Several projects are between light residential and full commercial scale, necessitating a compactor that will function in both applications without oversizing. The 6.5HP gas plate compactor with a 20.1 x 15 in plate, consistent vibration speed, and an EPA-compliant engine is ideal for patios, foundations, and asphalt patches. The 6.5HP high force model comes with a 21 x 16 in plate that provides more ground impact for larger landscaping and construction applications on gravel roads and soil-based foundations.


Heavy-Duty Compactors for Foundations and Road Work


Maximum compaction force over large surface areas is required for large-scale construction projects, road repairs, and foundation preparation. Foundation works and road construction projects can use the 7.0HP gas plate compactor with a 432 sq in plate area, which has an adjustable handle for control on slopes. The 7HP 196CC vibratory plate compactor with a 23 x 18 in plate delivers high-quality grease lubrication and efficient, long-life under heavy-duty in hard landscaping and paving applications.


Matching a Plate Compactor to the Job in Front of You


Beyond type and power, the surface you are compacting and how you work it change the pick, so this table maps common jobs to the material, the passes they take, and what to watch for.


Project Surface Being Compacted Passes to Expect What to Watch For
Garden paths and small patios Sand and loose topsoil Few, light passes Over-compacting soft soil can crack adjacent beds, so stop once the surface stops sinking
Paver base and bedding Crushed stone under sand Several overlapping passes Compact the base before sand, then again over laid pavers with a plate pad to avoid chipping
Driveway and walkway repair Gravel and heavy soil Multiple passes, each direction Dense gravel needs higher force; work in thin lifts rather than one deep layer for an even result
Asphalt patching Hot or cold-mix asphalt Repeated passes while warm Keep the plate moving so it does not sink in; a wetted plate helps asphalt release cleanly
Foundation and road sub-base Thick soil and aggregate lifts Many passes per lift Shallow machines will not reach depth here; match compaction depth to each lift so it does not settle later

What to Consider Before Buying a Plate Compactor


The key to selecting the right plate compactor is determining the engine power, plate size, and compaction depth that is suitable for the surface and project at hand. Purchasing equipment that is too small for the job can create problems, as can equipment that is too large for a small garden task.


Power Source for Your Work Environment


Electric compactors are ideal for indoor applications where fumes are a consideration, and for residential areas where noise control is an issue. For job sites, large driveways, and commercial projects, where runtime and compaction force are more important than noise, gas-powered models are superior. Before making specific comparisons, you should first determine if there is power access at the site or if a self-contained fuel-powered machine is needed.


Engine Size for the Surface Being Compacted


Smaller engines are able to compact lightweight soils; sand compacts easily, while gravel, asphalt, and dense clay will require more power to obtain the desired compaction depth. The 2.8HP model is recommended for residential soil and patio applications, and for applications involving the compaction of more compactable asphalt patches, road repairs, and compaction of gravel bases.


Plate Size for Coverage and Maneuverability


The larger the plate, the more distance covered per pass, resulting in less number of passes in large open areas. Smaller plates move easily around corners, curves, and narrow areas such as garden fringes and paver joints. The 18.7 x 11.8 in plate on the 2.8HP model is designed for detailed residential applications, while the 7HP has 432 sq in of plate, optimized for the biggest open construction sites.


Compaction Depth for the Project Foundation


The compaction depth needed to provide a stable base varies from project to project. Surface landscaping and patio preparation do not need heavy compaction, and the road bases and structural foundations should be compacted to a deeper depth, so that it does not settle over time.


Portability and Transport Between Job Sites


An immobile compactor will reduce the speed of multi-site projects. The larger compactor models, such as the 6.5HP 196CC, come with wheel systems, which means they can be rolled around job sites without having to lift the machine. When the compactor must fit into a regular vehicle for smaller projects, the smaller size of the 2.8HP and Electric models makes it easy to move around without needing a special trailer or van.


Best-Seller Comparison


The five models on this page line up below by power, output, and plate so the differences that drive the choice are side by side. Product names link to each page.


Product Power Source Engine / Motor Vibration Compaction Force Plate Size Best For
6.5 HP Balanced, 20.1 x 15 in Gas 196CC 5,600 VPM 2,360 lbs 20.1 x 15 in Most balanced pick here; patios and asphalt patches without oversizing
6.5 HP High-Force, 21 x 16 in Gas 196CC 5,700 VPM 4,047 lbs 21 x 16 in Highest VPM on the page; gravel roads and soil foundations
2.8 HP Light, 18.7 x 11.8 in Gas 98CC 5,250 RPM 1,920 lbs 18.7 x 11.8 in Smallest plate and lightest gas unit; tight detail paving
130W Electric, 3.9 in Depth Electric 130W 16 m/min travel 5 kN (approx. 1,125 lbs) 3.9 in depth Only fume-free, quiet option; indoor and noise-sensitive sites
7 HP Heavy-Duty, 23 x 18 in Gas 196CC 5,400 VPM 4,440 lbs 23 x 18 in Highest force and largest plate; open foundation and road work

Vibratory Plate Compactor For Sale


This category provides plate compactors for sale for all types of projects in all sizes and budgets, both electric and gas-powered. Whether it is a light residential landscape work or a heavy construction work, a user can find certain quality performance, durable building construction, and reasonable prices. No matter whether you are in need of a vibratory plate compactor to purchase, a plate compactor to sell me, or a compactor plate to sell me, these options offer value and efficacy.


FAQs


How do I choose the right plate compactor for my construction project?


Match force, plate size, and power source to the surface. Light soil and sand suit a 2.8 HP unit, while gravel, clay, and foundations need higher-force gas models. Compare options across the plate compactor range before deciding.


Are electric plate compactors as effective as gas-powered ones?


Electric models deliver clean, quiet compaction around 5 kN with about 3.9 in of depth, which suits patios and paths. For driveways, gravel bases, and foundations, gas units produce far higher force and longer runtime, so they outperform electric on demanding jobs.


Can you recommend the best plate compactors for small projects?


For small patios, paths, and garden edging, a 130W electric compactor or the 2.8 HP 98CC gas model works well. Both are light, easy to maneuver around corners, and simple to transport in a standard vehicle.


Which plate compactor is best for heavy-duty construction work?


The 7 HP 196CC model is the heaviest-duty option here, delivering 4,440 lbs of compaction force across a 23 x 18 in plate. It is built for open foundation preparation, road sub-base, and large-scale compaction where coverage and depth matter most.


Can electric plate compactors be used on uneven surfaces?


Yes. The vibrating steel plate applies even pressure and gradually levels minor undulations in sand, soil, and small aggregates. For very uneven or deep ground, work in thin layers and expect several passes, since electric units reach a shallower compaction depth than gas models.


How much does a plate compactor cost?


Pricing varies by power source, plate size, and region, so check the current figure on each product page. As a guide, compact electric and light gas units sit at the entry level, while high-force and heavy-duty gas machines represent the premium end of the plate compactor lineup.


Can I use a plate compactor on my lawn?


A plate compactor is made to firm up bare soil, gravel, sand, and paving sub-bases, not established turf. Running one over a living lawn compresses the root zone and damages the grass. Use it on cleared ground before laying sod, seed, or pavers.


How long does a plate compactor last?


With routine care, these machines last many years. Service life depends on engine upkeep, keeping the plate and vibration system clean, and correct grease lubrication. The heavy-duty gas models are built for long life under frequent, demanding use, while lighter units suit occasional residential tasks.


Tips & Inspiration