Welding Machines

Shop VEVOR Welding Machines for MIG, TIG, Plasma, and Stud Work

Welding aluminum, pulling dents, or building a trailer? It’s a VEVOR machine. Our welding machines include 130A to 250A MIG units, 200A to 225A AC/DC TIG welders, 140A to 200A stick welders, 50A to 65A plasma cutters, multi-process combos, and stud welder dent repair kits. Many use IGBT inverter power with dual 110/220V voltage, LCD or LED displays, and arc aids like Hot Start so that you can get clean, steady welds whether you’re a pro or a weekend DIYer.

MIG, TIG, Plasma, Stick, and Stud: Pick Your Process

VEVOR welding equipment has all the usual processes, from a 130A gasless MIG starter to a 225A AC/DC TIG to a 65A plasma cutter. The right process suits your metal, your thickness, and your polish.

130A to 250A MIG Welders, Gas or Flux Core

MIG is the easiest method to learn, and VEVOR offers a range of models, from a 130A gasless to a 250A pulse. Once you've got the wire set, a synergic MIG welder matches voltage and wire speed so that a first-timer can lay down a neat bead quickly. Entry 130A machines run 110V flux core; 200A and 250A units add 220V for thicker steel.

Most are multi-process, with the 4-in-1 offering Gas MIG, Flux Core MIG, Stick, and Lift TIG, and the flagship 5-in-1 adding MIG Pulse. Gasless variants are great for flux core welding, work well outdoors, don't need a shielding tank, and perform well in the wind. Because that is the customary starting point, you skip the gas cylinder. The same feeder can handle flux-core and solid-wire spools.

Got to join thin aluminum? A pulse MIG welder (with spool-gun compatibility for aluminum MIG) handles it cleanly. Whether you’re building trailers or patching a fence, these welders handle mild steel, stainless, and aluminum from one wire feeder.

200A to 225A TIG and 140A to 200A Stick Welders

TIG is the choice for precision. VEVOR’s 6-in-1 aluminum-construction TIG welders achieve 200A and 225A, delivering AC TIG, DC TIG, AC Pulse TIG, DC Pulse TIG, Spot TIG, and MMA stick from a single panel with synergistic control. The AC output lets you weld aluminum and steel, and the high-frequency start gives a clean arc without scratching the material.

Stick welders are great when you want simplicity and portability. The ARC portfolio includes 140A, 160A, and 200A in a 2-in-1 ARC and Lift TIG configuration and tiny 20 to 140A portable variants for 1/16 to 1/8 inch rods. Their light inverter enclosures make them easy to carry up a ladder or out to a fence line for onsite maintenance.

All stick units include Hot Start, Arc Force, and Anti-Stick to help beginner welders stabilize the arc. From fine stainless fabrication on TIG to rapid structural repairs on stick, this welding equipment covers both detailed and rugged ends of the business.

50A to 65A Plasma Cutters and Multi-Process Combos

Combo machines cut and weld. VEVOR Plasma Cutters 50A, 65A Non-Touch Pilot Arc Cutting. Cuts steel, stainless, and aluminum cleanly up to roughly 10mm. 2T/4T control. Digital IGBT display.

Multi-process welders combine cutting and welding into one box that does it all! 3-in-1 CUT/TIG/MMA includes a 50A plasma cutter and a 200A TIG stick welder. 5-in-1 adds Gas MIG and Flux MIG as a genuine all-rounder. The pilot arc starts without touching the tip, so painted or rusted metal is no problem. One dial selects between cutting and welding.

These combos are great for a home shop or repair bay that is tight on space, replacing three tools with one. These welding machines run on dual voltage 110 or 220V, and allow you to cut a panel, tack it, and finish the weld without ever changing equipment, a big time-saver on mixed jobs.

Stud and Spot Welders for Auto Body Dent Repair

For bodywork, you need a different tool. VEVOR’s stud welder dent repair kits range from 800VA to 5KW, utilizing spot welding to fuse pins to a panel, allowing a slide hammer to extract dents without drilling. Available in 6, 7, or 10 modes, Dual Pro can operate on steel and aluminum panels.

These units fire a rapid, localized weld perfect for sheet metal. Kits ship with guns, hammers, and rings for a complete station. Auto and manual options let beginners use presets, while pros can adjust each pull for tough, high-strength panels.

Two searches don’t fit in with this lineup: laser welders, the fiber-optic machines used in industrial workplaces, and battery welders that run cordless. VEVOR’s welding machines here are corded 110 or 220V MIG, TIG, stick, plasma, and stud welders, not laser or battery-powered tools, so plan on a wall outlet.

Amperage and Features That Set VEVOR Welding Machines Apart

Two things determine daily performance: how much amperage you can pour into the metal and what features keep the arc stable. Comparison of VEVOR welding machines.

Matching 20 to 250 Amps to Metal Thickness

The bigger number is the amperage. For thicker metal, you'll need more amps; roughly, a 130 to 160A machine will handle sheet metal and light steel up to around 3/16 inch, good for home and hobby work. For trailer frames and thicker structural steel plate, go to 200 to 250A.

20 to 140A portable sticks at the low end are for fast fixes and 1/16 to 1/8 inch rods. Plasma cutters rate their power in cutting amps, 50A or 65A, tuned to cut thickness, not weld penetration. The duty cycle is also important. A higher rating implies more continuous cutting before the machine takes a break to cool, and even a small shop can use extra headroom on thicker work.

Rule of thumb: buy a little more amperage than you think you need, because a machine loafing at half output runs cooler and lasts longer than one that's maxed out. These welders are scaled for your average metal and deliver clean fusion without burning through or leaving a cold, weak joint.

IGBT Inverters, Dual Voltage, and Synergic Displays

That’s where these machines stand out: in features. Each device uses IGBT inverter technology to shrink the transformer into a lightweight, portable unit with a steady arc and lower power consumption than traditional transformers.

Most are dual voltage, hooking into a standard 110V outlet or a 220V circuit for full output, so the same equipment works in a garage or shop. Your settings appear on an LCD or LED screen, and synergic control on MIG machines automatically pairs voltage with wire speed.

Arc assists such as Hot Start, Arc Force, and Anti-Stick help make striking and holding an arc easier, especially for beginners. 2T/4T triggers less hand strain on extended cuts. Built-in overheat protection and a cooling fan keep the internals safe during intense sessions, extending the machine's life. VEVOR welding machines pack these features and deliver performance well beyond their size. This feature set makes these welding machines easier and safer to run every day.

Why Choose VEVOR Welding Machines?

VEVOR welding machines offer the range, power, and value every fabricator needs, from a first gasless MIG to a 6-in-1 aluminum TIG or car body stud welder. The MIG, TIG, stick, plasma, multi-process, and stud welders range from 20 to 250 amps, and all use IGBT inverter technology and dual voltage. With every order, you’ll also get portable builds, reliable arcs, and timely customer support. Want to strike an arc? Get your next project powered by the VEVOR welding machines shop today.

FAQs

What is a multi-process welder?

Multi-process welders perform multiple welding processes on the same machine. Think of it as a 4-in-1 machine that does Gas MIG, Flux Core, Stick, and Lift TIG. VEVOR combos even include plasma cutting, combining three tools in one box.

Do I need gas for a MIG welder?

Not all the time. VEVOR’s gasless flux core MIG welders do not need a shielding tank, and the self-shielded wire is good for outdoor and windy conditions. Gas MIG variants add a tank for cleaner welds on thinner steel and stainless steel.

What amperage welder do I need?

A 130 to 160 amp machine works for sheet metal and mild steel. Structural steel, trailer frames, or thick plate: 200 to 250A. Better to have a little more amperage than you need to keep the machine cool and robust.

Does VEVOR sell laser or battery welders?

Not in this class. They are corded 110 or 220V MIG, TIG, stick, plasma, and stud welding machines. You’ll need an outlet, because the portfolio lacks fiber laser welders or cordless battery welders.