You can lift heavy loads by hand with VEVOR manual chain hoists by simply pulling the chain; no electricity is required. The range includes G70 or G80 galvanized load chains, lifting heights of 8, 10, and 20 feet, and capacities of 1/2, 1, 2, and 3 tons (1100 to 6600 pounds). Each hoist suits garages, warehouses, auto shops, and machinery operations because it is small, portable, and built around a sturdy gear-and-bearing hoist. Each hand chain hoist is ready to lift and sized for the task, whether you are pulling an engine or rigging a beam.
Do you need to lift a large object in an area without a power outlet? With a hand chain pull, VEVOR manual chain hoists provide controlled, manual lifting of 1/2 to 3 tons. Each small block, built around sturdy gears and reinforced with G70 or G80 chain, is both lightweight and robust enough for engines, machines, and rigging, making it a dependable choice for job sites, garages, and warehouses.
Match both to your loads and your workspace. Capacity determines how much you can safely carry, and the type of hoist determines how you operate it.
Smaller capacities are perfect for lighter loads and confined locations. For light machinery, motors, and workshop activities where a full-size device would be overkill and harder to position, the 1/2 ton chain hoist is ideal because it can lift up to 1100 pounds.
Moving up, the 1 ton chain hoist is the most adaptable everyday size, capable of handling engine pulls, HVAC units, and regular garage lifting with plenty of leeway. It can lift 2200 pounds. The lift heights are 8, 10, and 20 feet.
Because of their small size and low weight, these lighter manual chain hoists are easy to link to a beam or gantry and transport to the job site. Despite their small size, the G70 or G80 chain maintains its strength.
A 1/2 or 1-ton unit provides dependable lifting without additional bulk for home garages, small shops, and light industrial operations. Match the capacity just above your heaviest load to enjoy simple, controlled hand operation. These lighter models are the simplest manual chain hoists to keep on a shelf or load onto a truck between tasks.
The greater capabilities take over when the loads become significant. With a lifting capacity of 4400 pounds, the 2 ton chain hoist is ideal for heavy machinery, heavy engines, and tough shop tasks where a high safety margin and additional lifting strength are crucial.
Built for the biggest machinery, structural lifts, and industrial rigging, the 3 ton chain hoist can support a massive 6600 pounds at the top. For tougher tasks, both include upgraded G80 galvanized chains and lift heights of 10 and 20 feet.
This family of heavy duty manual chain hoists combines a hardened chain and reinforced gear train to transfer large loads safely and smoothly using only hand power. Even a three-ton lift is manageable thanks to the block's mechanical advantage.
Stepping up to a 2- or 3-ton unit guarantees you never overload the hoist for fabrication shops, warehouses, and heavy automotive work. For safe, dependable operation, always choose a capacity comfortably above your highest lift. These manual chain hoists' extended 20-foot lift is ideal for towering gantries and high bays, where a short chain would be insufficient.
This category centers on the hand chain design. A manual hand chain hoist raises or lowers the load chain with a powerful mechanical advantage, making large loads feel light by pulling a loop of hand chain to turn an internal gear train.
With no motor, battery, or cord to malfunction, this traditional manual chain block is highly valued for its ease of use, portability, and dependability. The gear-and-bearing mechanism does all the work, pulling steadily and under control.
These units' load-bearing manual hoist chain is made of improved G70 or G80 galvanized steel, which resists corrosion and wear for long, reliable service. Wherever you stop tugging, a brake mechanism keeps the load firmly in place.
The hand chain arrangement is the workhorse of these manual chain hoists, providing reliable performance with the smallest, most portable footprint in the lineup for accurate, strong lifting anywhere without electricity. Except for capacity and lift height, all hand chain models in the line use this same reliable mechanism.
For an alternative operating style, VEVOR also offers a lever-operated design alongside hand chain variants. A manual lever chain hoist allows you to lift, pull, or tighten a load at any angle, including horizontally, by using a ratcheting lever in place of a hand chain loop.
This lever chain hoist is particularly useful for pulling and fastening items, not just vertical lifting, and for confined spaces where a full hand chain cannot be used. The ratchet action uses short, deliberate strokes to transfer the load.
Many stores keep both types on hand since the lever type is superior for inclined and horizontal operations. In contrast, the hand chain block is better for straight overhead lifting. Both offer robust, hand-powered dependability.
The lever option complements these manual chain hoists well if your activities need pulling, tensioning, or lifting in confined spaces. Before deciding between hand chain and lever operation, think about how and where you will lift. However, the hand chain block remains the most straightforward and cost-effective option for pure overhead work at a fixed location.
Weigh both before purchasing because, beyond capacity and type, the chain grade and the hoist's location determine its longevity and ideal fit.
The chain is where duty rating begins. Upgraded galvanized load chains of either G70 or G80 grade are used in every manual hoist in the line. These chains are strengthened for strength and corrosion resistance so the hoist can withstand heavy lifting.
The higher-capacity versions use G80 chain, which provides the best strength-to-weight ratio for the largest loads. In contrast, the G70 chain reliably supports lighter-duty lifts. Both resist wear and stretch far better than standard chains.
A manual hoist lift built around a strong gear-and-bearing block and a dependable braking system holds loads firmly and lowers them under full control. In a busy shop, the little steel casing can withstand knocks.
Chain grade and build quality are what distinguish these manual chain hoists as a reliable tool under load year after year, so compare the chain grade to your duty cycle and select the one that corresponds with the amount of work you will do. Keep any hoist safe with routine inspection of the chain and hooks, and our improved chains make that maintenance simple.
These hoists are used in a variety of situations. A VEVOR unit is a manual garage hoist that pulls big parts, engines, and gearboxes in both residential and commercial garages. It gives one person controlled lifting force without electricity.
They manage rigging and positioning on job sites whenever a beam or gantry is available, and they hoist machinery, goods, and equipment in warehouses and workshops. The lever design also pulls and tightens loads horizontally when used as a manual chain winch.
Riggers, fabricators, automobile shops, and farms use these tools because they are strong, portable, and power-free. Instead of moving the load to a fixed lift, you can bring the hoist to the load.
These manual chain hoists cover a wide range of hand-powered tasks, from everyday industrial lifting to a weekend engine change. Choose the model and capacity that best suit your operation, and lift dependably wherever you need it. These manual chain hoists get right to work in isolated sheds, fields, and incomplete structures because they don't require an outlet or generator.
With capacities up to 6600 pounds, updated G70 and G80 galvanized chains, 8 to 20 foot lift heights, and a sturdy gear-driven block, VEVOR offers every hand-powered lifting need in a single lineup, ranging from an agile 1/2 ton block to a strong 3 ton lifter. All manual chain hoists are portable, dependable, and electricity-free, making them suitable for garages, warehouses, and construction sites. It also comes with reliable after-sales support. Get regulated, powerful lifting power wherever your work takes you by looking through the entire range right now.
With lifting capacities ranging from 1100 to 6600 pounds, the range includes 1/2-, 1-, 2-, and 3-ton models. For dependable, safe hand-powered operation, always choose a capacity comfortably above your heaviest load.
A manual chain hoist uses a pulled chain loop to lift objects directly overhead. Lever hoists are perfect for tight or angled work because they employ a ratcheting handle to lift, draw, or tension objects at any angle, including horizontally.
They employ G70 or G80 grade improved galvanized load chains. Both grades resist strain, wear, and corrosion for extended use, and G80 offers the highest capacity with the best strength-to-weight ratio.
Garages, warehouses, auto shops, farms, and construction sites are examples of places with a solid beam or gantry that don't require electricity. They use controlled hand operation to hoist rigging, engines, and machinery.
