Ask about this product by AI
2 Sets Linear Rail Sbr20-1000mm Sbr20-1200mm Shaft Rod Lathes High Rigidity
- SBR20-1200mm Linear Rail Set
- Linear bearing is a low-cost production of linear motion system for unlimited travel in conjunction with the cylinder axis. Because of point contact between ball and straight axis, so the load is small. The ball is spinning with the smallest friction, it can run a high precision and smooth motion. Flange linear bearings can be divided into: round flange type, oval flange, guide wheel flange, guide the oval flange type, plus long round flange type.
- This is the sliding unit with the aluminium case, shafts and aluminium rail for preventing deflexion. This is the complete sliding unit systems and can be clamped simply tightening by bolt with high accuracy. The support rail unit provides maximum rigidity and stiffness to the shaft throughout the whole stroke, and ensure the performance of the unit.
- The shaft is case hardened. If you use normal steel shafts, the bearings will cut them up in no time. So make sure what you buy is case hardened!
- Application
Reviews summary
Al-generated from customer reviews
Frequently Bought Together
Reviews
About this item
SBR20-1200mm Linear Rail Set
Linear bearing is a low-cost production of linear motion system for unlimited travel in conjunction with the cylinder axis. Because of point contact between ball and straight axis, so the load is small. The ball is spinning with the smallest friction, it can run a high precision and smooth motion. Flange linear bearings can be divided into: round flange type, oval flange, guide wheel flange, guide the oval flange type, plus long round flange type.
This is the sliding unit with the aluminium case, shafts and aluminium rail for preventing deflexion. This is the complete sliding unit systems and can be clamped simply tightening by bolt with high accuracy. The support rail unit provides maximum rigidity and stiffness to the shaft throughout the whole stroke, and ensure the performance of the unit.
The shaft is case hardened. If you use normal steel shafts, the bearings will cut them up in no time. So make sure what you buy is case hardened!
Application
It is widely used in linear motion system. For example, punch, tool grinding machine, automatic cutting machine, printer, card sorting machine, food Packing Machine, other sliding parts on industrial machinery.
SBR20-1000mm Linear Rail Set
Linear bearing slide rail for sale! Order this package and you’ll receive 2 pieces of1000 mm/39.5" long SBR20 rail shaftsand4 SBRUU bearing blocks.
Our rail shaft is made with good quality steel plus aluminum alloy. It is a perfect combination of main axle and aluminum support, which nicely stabilizes the original rail.
Application
- For various kinds of automated machines and equipments.
- Helps to build economical linear guiding system.
- Applicable for large-scale transmission equipment including industrial robots, cracker machines, supersonic cleaning equipments, solar energy and clothing supporting devices, etc.
Features
- Cylindrical guide composed by principal rail and aluminum support, stabilizing the original rail.
- Sliding blocks to be used cooperatively with rails, smooth sliding provided by inside linear bearing.
The items may be in different stock, so they may be sent separately. Pls do not worry, you will receive ALL the parcels in recent days after the order.
- This link for 0.78inches slotted bearings
- Perfect for your DIY CNC routers, mills, lathes
- The shaft is case hardened. If you use normal steel shafts, the bearings will cut them up in no time. So make sure what you buy is case hardened
- Aluminum support rail with pre-drilled holes for ease of mounting
- Suits X, Y, Z axis
- No more unwanted errors in your machining work
SBR20-1000mm Linear Rail Set
- 100% brand new and good quality
- 1000 mm/39.5" long SBR20 rail shaft
- 4 SBR20UU blocks with smooth sliding
- Helps to build economical linear guiding system
- Free warranty of 2 years
- Type: Linear Actuator
- Model: SBR20-1200 SBR20UU
- Length: 47" (1200 mm)
- Diameter: 0.78" (20mm)
- Guide material: Axis - 45 carbon steel optical axis, chrome-plated surface hard axis; bracket - aluminum
- Optical axis accuracy: Optical axis accuracy g6 level
- Optical axis hardness: HRC58-60 degrees
- Packing size: 49"x5"x3"(122x12x7cm)
- G.W.: 11lbs( 5kg)
SBR20-1000mm Linear Rail Set
- Brand: Vevor
- Type: Linear Actuator
- Condition: 100% brand new
- Diameter: 20 mm (0.78")
- Rail Shafts: 2 X SBR20,1000mm(39.5")
- Gross Weight: 8kg (17.6 lb)
- Package Dimensions: 102* 9* 8 cm (40.2"* 3.5"* 3.1")
2 X SBR20-1200mm Rails
- 4 X SBR20UU Blocks
SBR20-1000mm Linear Rail Set
- 2 X SBR20 1000 mm/39.5" Fully Supported Linear Rail Shafts
- 4 X SBR20UU Bearing Blocks
SBR20-1200mm Linear Rail Set
Linear bearing is a low-cost production of linear motion system for unlimited travel in conjunction with the cylinder axis. Because of point contact between ball and straight axis, so the load is small. The ball is spinning with the smallest friction, it can run a high precision and smooth motion. Flange linear bearings can be divided into: round flange type, oval flange, guide wheel flange, guide the oval flange type, plus long round flange type.
This is the sliding unit with the aluminium case, shafts and aluminium rail for preventing deflexion. This is the complete sliding unit systems and can be clamped simply tightening by bolt with high accuracy. The support rail unit provides maximum rigidity and stiffness to the shaft throughout the whole stroke, and ensure the performance of the unit.
The shaft is case hardened. If you use normal steel shafts, the bearings will cut them up in no time. So make sure what you buy is case hardened!
Application
It is widely used in linear motion system. For example, punch, tool grinding machine, automatic cutting machine, printer, card sorting machine, food Packing Machine, other sliding parts on industrial machinery.
SBR20-1000mm Linear Rail Set
Linear bearing slide rail for sale! Order this package and you’ll receive 2 pieces of1000 mm/39.5" long SBR20 rail shaftsand4 SBRUU bearing blocks.
Our rail shaft is made with good quality steel plus aluminum alloy. It is a perfect combination of main axle and aluminum support, which nicely stabilizes the original rail.
Application
- For various kinds of automated machines and equipments.
- Helps to build economical linear guiding system.
- Applicable for large-scale transmission equipment including industrial robots, cracker machines, supersonic cleaning equipments, solar energy and clothing supporting devices, etc.
Features
- Cylindrical guide composed by principal rail and aluminum support, stabilizing the original rail.
- Sliding blocks to be used cooperatively with rails, smooth sliding provided by inside linear bearing.
The items may be in different stock, so they may be sent separately. Pls do not worry, you will receive ALL the parcels in recent days after the order.
- This link for 0.78inches slotted bearings
- Perfect for your DIY CNC routers, mills, lathes
- The shaft is case hardened. If you use normal steel shafts, the bearings will cut them up in no time. So make sure what you buy is case hardened
- Aluminum support rail with pre-drilled holes for ease of mounting
- Suits X, Y, Z axis
- No more unwanted errors in your machining work
SBR20-1000mm Linear Rail Set
- 100% brand new and good quality
- 1000 mm/39.5" long SBR20 rail shaft
- 4 SBR20UU blocks with smooth sliding
- Helps to build economical linear guiding system
- Free warranty of 2 years
- Type: Linear Actuator
- Model: SBR20-1200 SBR20UU
- Length: 47" (1200 mm)
- Diameter: 0.78" (20mm)
- Guide material: Axis - 45 carbon steel optical axis, chrome-plated surface hard axis; bracket - aluminum
- Optical axis accuracy: Optical axis accuracy g6 level
- Optical axis hardness: HRC58-60 degrees
- Packing size: 49"x5"x3"(122x12x7cm)
- G.W.: 11lbs( 5kg)
SBR20-1000mm Linear Rail Set
- Brand: Vevor
- Type: Linear Actuator
- Condition: 100% brand new
- Diameter: 20 mm (0.78")
- Rail Shafts: 2 X SBR20,1000mm(39.5")
- Gross Weight: 8kg (17.6 lb)
- Package Dimensions: 102* 9* 8 cm (40.2"* 3.5"* 3.1")
2 X SBR20-1200mm Rails
- 4 X SBR20UU Blocks
SBR20-1000mm Linear Rail Set
- 2 X SBR20 1000 mm/39.5" Fully Supported Linear Rail Shafts
- 4 X SBR20UU Bearing Blocks
