VEVOR knockout punch sets cut fast, clean, precisely round holes in electrical cabinets, conduit runs, and metal panels without a drill or messy burrs. The range includes 10-ton and 15-ton hydraulic driver kits, a powerful 35-ton hydraulic punch, and a manual SLUG-Buster ratchet set with die ranges from 1/2 to 4 inches and 4 to 10 pieces per kit. Hardened 40Cr punches and hardened 40Cr dies to punch aluminum, brass, stainless steel, mild steel, copper, fiberglass, and plastic. For electricians, fabricators, and panel builders, we offer the knockout punch sets sized for the job.
Sick of ragged, off-center holes from a drill and hole saw? VEVOR knockout punch sets create fast, clean, accurate apertures in sheet metal, enclosures, and conduit, with a lot less work and no walking bit. From a pocket manual ratchet kit to a 15-ton hydraulic driver, each kit pairs hardened dies with a powerful ram to deliver predictable, professional results on aluminum, steel, and more.
A hydraulic ram or a hand ratchet can power a punch. Your choice affects speed, effort, and best application. So first match the drive to your workload.
For volume work, the hydraulic driver is the most preferred. VEVOR's hydraulic punch driver kit employs a hand-pumped ram to drive dies through metal with little effort. The range includes 10-ton kits for holes from 1/2 to 2 inches and 15-ton kits for holes up to 4 inches.
These knockout punch sets are great for when you have plenty of holes to make or thicker stock to get through, because the hydraulic ram performs the heavy lifting while you pump. That means less fatigue for a big panel job.
Complete hydraulic punch and die sets so you're ready to punch out of the box. Each kit includes the pump, ram, draw stud, and matched dies: every time, consistently burr-free, clean holes.
If you're an electrician or fabricator repeatedly doing the same cabinet or conduit work, a hydraulic driver is the fastest, least exhausting way to get to the right holes, which is why these kits are the backbone of the VEVOR series. The 15-ton hole punch kit handles wider 3- and 4-inch apertures for large conduit and gland fittings. The 10-ton knockout punches tool maintains a lighter, more compact profile for regular panel work.
Raw power matters when the material is thick or tough. VEVOR's CH-70 is a professional hydraulic punch press for industrial use; it can punch iron plate, copper bar, aluminum, and stainless steel with 35 tons (about 350 kN) of force.
Thisknockout puncher is designed for busbars, structural plates, and heavy construction where a standard kit won't cut it. It cuts through tough material cleanly, maintains consistent penetration, and minimizes chipping, so finished holes don't need further cleanup before you install hardware.
The high-tonnage hole punch kit is for shops that punch heavy stock every day, not for occasional panel holes like VEVOR's knockout punch sets. Pair it with the right hydraulic pump, and it will chew through plate that stops lesser tools dead.
If you work with thick copper, steel bar, or continuous industrial punching, moving up to a high-tonnage hydraulic tool gives you the muscle and reliability that lighter kits can't match on the toughest projects. Improved placement drives straight without offset, so even on hard plate the hole lands exactly where you marked it, cut after cut.
Not all jobs need hydraulics. VEVOR's SLUG-Buster manual set uses a simple ratchet wrench to drive the dies, making it a compact, inexpensive, and extremely portable alternative for quick projects and tight budgets across the knockout punch set range.
This knockout punch tool handles hole sizes from 1/2 to 2 inches and includes six dies made from hardened 40Cr steel. It will cut cleanly through aluminum, mild steel, fiberglass, and plastic. The self-cleaning slug design automatically pops out the cut-out piece. It means you don’t have to worry about jams or a dull punch.
This is a manual set, so it’s a great choice for service workers and DIYers who need to punch a hole now and again. You can fit this kit in a bag and take it anywhere. It has all the wrenches and dies you need, no pump, no oil, no maintenance. The entire set is light enough to carry up a ladder.
If you care more about mobility than speed, this ratchet set is the practical selection. A hardened die and the hand force you have been trained to use will clear holes. Fluid-free, it won’t leak or need refilling, and you can count on it for years in a truck or toolbox, ready at a moment’s notice to make an odd hole on site.
These hole punch kits are built for everyday trade work. Electricians use them to punch clean holes for conduit and connectors in breaker panels, junction boxes, and switch cabinets, without bending the metal or leaving sharp edges.
The conduit hole cutter set makes holes from 1/2 to 4 inches, matching standard trade sizes exactly. That means conduit and fittings slide in tight, with no gaps. This saves time and helps you pass inspection.
Fabricators and panel builders use them too, on control cabinets, busbars, and sheet metal, cutting through aluminum, brass, stainless steel, and copper just as easily. Because the holes come out clean, you don't need to file or smooth the edges before installing anything.
You can use these knockout punch sets in the field or on the production bench. The key to saving time with these knockout punch sets is choosing the right hole punch kit for the material and hole size. It turns a sluggish drilled hole into a quick precision punch. HVAC installers, sign makers, machine builders, and more also use them. Use it whenever you need a clean, round hole in metal that looks great and fits the first time perfectly.
When you pick the drive type, the box contents and the holes created determine whether the knockout punch sets cover your trade sizes.
Always choose gear that fits your work. VEVOR offers a range of knockout punch kits, from a small 4-piece kit with 1/2, 3/4, 1, and 1 1/4-inch dies to a comprehensive 10-piece kit covering 1/2 through 4 inches for full trade coverage.
Each kit includes the punches, dies, and draw studs for each size. The hydraulic kit includes a pump and ram. The dies are crafted from hardened 40Cr steel to remain sharp punch after punch.
If you deal with lots of different hole sizes, a multi-piece KO tool kit is worth it because this one case covers everything. But if you generally do standard electrical work, the 6-piece 1/2" to 2" kit is usually all you need.
Select the size range that suits you so that you won't pay for dies you will never use. To keep the job moving, match the kit to the fittings you use most. VEVOR’s Multi-Piece KO Tool Kit also keeps all dies organized and protected so nothing gets lost or rolls away between jobs.
The hole range and the material you’re working with determine whether the size is the right fit. Our knockout punch sets cover diameters from 1/2” to 4”. These diameters line up with the conduit, connection, and gland sizes you will run into across electrical and fabrication work. You don’t need an adapter.
Material capacity is equally important. These hole punch kits punch aluminum, brass, copper, stainless steel, mild steel, fiberglass, and plastic. Hydraulic variants can handle thicker steel and copper plates than a manual ratchet can. Softer metals punch quicker. Denser stainless steel needs larger-tonnage tools to keep the cut clean.
Always check the die size against your fitting and the tool's recommended material thickness before punching, since matching both will provide a clean, full cut without straining the ram or dulling the die prematurely.
Get the hole size and material right, and these knockout punch sets will create faultless, burr-free holes on the first press. First, verify your trade sizes and stock thickness, then choose knockout punch sets that cover them with room to grow. Your most-used fitting sizes are quickly referenced for fast, fail-safe selection of the correct die on the job.
VEVOR brings a full range of knockout punch sets. The range includes everything from pocketable manual ratchet kits to 10-, 15-, and 35-ton hydraulic hole punch kits for your punching needs. They include hardened 40Cr dies, 1/2- to 4-inch hole ranges, and 4- to 10-part kits for aluminum, steel, copper, and more. Get fast, repeatable, burr-free holes for electricians, fabricators, and panel builders alike. All of these are backed by reliable after-sales support. Buy the whole selection now and punch precise holes in a fraction of the time.
Hydraulic Sets Use a Pumped Ram to Punch Effortlessly. This is great for volume or thick metal. Manual ratchet sets can also drive dies by hand. They are also portable and are good value for lighter, infrequent hole-punching projects.
Punch sizes range from 1/2" to 4". This range covers typical conduit, connector, and gland fittings. Piece counts range from 4- to 10-piece kits, encompassing the complete trade range.
They punch aluminum, brass, copper, stainless steel, mild steel, fiberglass, and plastic. Hydraulic hole punch kits are intended for heavier steel and copper plates. Manual knockout punch sets are better for thinner, softer sheet metal and enclosures.
Yes. VEVOR employs hardened 40Cr steel dies designed to resist wear. This means edges stay sharp despite repeated punches. The self-clearing slug design also ejects cuttings cleanly to prevent jams.
