I didn’t use it for this, but it might be possible although perhaps not wide enough. Suggest you check with manufacturer.
By Dinah Francis
It isn't designed to take the weight of car or pickup truck.
By Sharon Kathleen
It is heavy duty and very rigid so I would say yes ...
By Kay Meredith
This ramp is very very sturdy. It is rated to support 2200 lbs. As it is ~ 42 inches wide, many vehicle wheel bases' are wider than that, making a requirement of 2 to support a vehicle's width. And since it would only be supporting the front (or rear) half of a vehicle, that makes the weight even less. It really should be ok to drive a car over it.
By Meroy
The ramp is really heavy but I don't know about driving a car over it
By Xaviera Thoreau
I only used it as a doorway ramp - do not believe that it can with stand a car being driven over it numerous times.
By Bertram Acheson
Has a 2200 lb load capacity for wheel chairs and/ or scooters!
By Modesty Kell(e)y
Yes. This ramp is heavy and tough.
By Claire Josh
It would take one for each tire to drive on, and each is rated for only 2200#. It would probably work for a small compact to midsized car, but anything bigger would weigh too much. But, why take the chance when you can get curb ramps made specifically for cars and rated at 10k# for less than half the cost of these.
By Vanessa Arthur
Not sure, and you may need a 2nd one due to the width. I suggest you check with the manufacturer if this info is not on the site specifications section.
By Isabel Belloc
That is exactly what we do, so yes.
By Hazel Motley