VEVOR 8 in Benchtop Drill Press, 2.5A Induction Motor, Tabletop Drilling Machine with 620 / 1140 / 1740 / 2340 / 3100 RPM Adjustable Speed, 0-45° Tilting Worktable, LED Work Light, for Wood Metal

A 10in wen table bench does not fit on a vevor 8 in drill press.

I have tha 12 inch and its about 65 to 70 pounds ,i would say but it comes in Parts and the heaviest part was the top with built in motor u have to lift and set on top of press to finish putting together.u should have no problem with 10 inch i put 12 inch one together by myself.

some

For Benchtop Drill Press, it can be used with WEN accessories.

All our products come with a 12-month warranty.

1. It will depend on you Bit of choice . It requires a ceramic bit. 2 it will need to be able to be secure to the table. It it moves it will break 3. The hole will need to be drilled on a flat section of the ceramic. A flat tile is easy a round service is hard. It's a great drill press for my main wood working projects

the type of drill doesn't matter. it could even be done with a hand drill. the actual DRILL Bit itself is what matters. I'd suggest either a diamond hole saw kit or masonry drill bit set. Start at an angle with the diamond hole saw and start at a slow speed. once some progress is made, slowly tilt it straight and continue until you're through the material. Hope that helps.