VEVOR 3 Phase Converter - 2HP 7A 220V Single Phase to 3 Phase Converter, 220V Input/Output, Digital Phase Shifter for Residential & Light Commercial Use (One Converter for One Motor Only)

Note that this motor is an additional motor, and the power is the same as that of the phase converter. The three-phase power supply you need is taken from the UVW terminals of the phase converter, so you can use it. This output is three-phase 220V, which can be used for any three-phase 220V equipment, including ovens. But pay attention to the wire diameter of the power cord Download address of the manual. https://www.askpower.net/data/cps_user_guide.pdf The file is a bit large, 70M.

2. Method of using as power supply The following is the method of using the phase converter normally and the wire diameter of the required wires. Method of using phase converter. The wire connection method is as follows: Power supply > overcurrent protector > switch > phase converter > motor (this motor is an additional motor. LN connects to 220V power supply, that is, the voltage between these two lines is 220V. UVW connects to the motor.

How to use the phase converter. 1 The wiring method is as follows: Power supply>overcurrent protector>switch>phase converter>motor LN connects to the 220V power supply, that is, the voltage between these two lines is 220V. UVW connects to the motor, and the motor needs to be modified to 220V voltage level. But pay attention to the wire diameter of the power cord

Dear Customer, Thanks for your inquiry. If used directly, the motor power is too small You need to convert the digital phaser to a rotary phaser before you can use it. 1. How to use it as a motor starter. The following is the method of normal use of the phase converter and the wire diameter of the required wire.