VEVOR Laboratory Chiller Circulator, 6L Chiller Lab Low Temperature Cooling Liquid, 23°F-212°F Circulator Pump Chiller, LCD Display, 304 Stainless Steel Water Bath Recirculating Water Cooling Chiller

20 degrees cooling capacity is 150W, flow rate 6L/min.

It is not recommended to replace the built-in pump. The internal pump is optimized for the chiller's heat exchange and temperature control system. Replacing or bypassing it may disrupt the unit's cooling performance and trigger internal errors. For higher flow requirements, it is safer to use an external booster pump in the external loop circuit, but please be aware that any unauthorized modifications may void your warranty.

5°C: You can use either alcohol or antifreeze as the liquid in the tank. The lower the freezing point of the liquid, the better; it just needs to maintain good flow properties at the operating temperature.

We don't not provide a dedicated link you can directly purchase these widely available standard parts from other suppliers on the platform. If this answer does not resolve your current issue, please contact us again for assistance.

Certainly. The equipment comes standard with these components. If you need to purchase additional parts, the most convenient method is to search for silicone tubing directly on the online platform. Select specifications with an inner diameter of 8mm and an outer diameter of 11mm. For rotary components, choose ball valves with either 8mm or 10mm ball valve pagoda-style connections.

The outer diameter of the inlet/outlet is 10mm.