Use a 36G blade for the workhead; the maximum speed should generally be kept below 9,000 RPM, and the maximum runtime should not exceed 20 minutes.
If this answer does not resolve your current issue, please contact us again for assistance.
By vevor
Run it for 5 minutes. To set the speed, you can first press the start button and then adjust the knob to set the RPM, or you can adjust the knob to set the speed first and then press the start button.
By vevor
Cleaning the workhead: First, disassemble the workhead, then clean it with alcohol, water, or a solvent—the choice depends on the material of the user’s workpiece. Generally, cleaning with alcohol is preferable. For the initial test run, fill the chamber with 2000 ml of water and set the speed between 5000 and 8000 RPM.
By vevor
