VEVOR 1.5 HP Cast Iron Sprinkler/Irrigation Pump, 115/230 Volt, 66 GPM 3450 RPM Shallow Well Jet Water Pump Booster, 1'' NPT Outlet 1-1/4'' NPT Inlet Lake Lawn Pump for Irrigation Sprinkler System
1.5HP Cast Iron
Questions and Answers
19 Questions
Can someone please help and tell if I can use a 2" suction line, it wont pull water to the pump from pond at 22 feet using the 2:" line i have from my gas pump.
The water inlet pipe can use a 2" water pipe, but the adapter must be sealed, otherwise the water pump will not be able to pump water.
By vevor
1. Can I switch to a 40/60 switch?
2. Is the impeller brass?
1. It cannot be switched; 2. The impeller material is engineering plastic + brass.
By vevor
How loud is it?
What type plug for electricity comes with it or does it hard wire?
I want to use this pump to draw water from the bottom of a 10 ft deep pond to circulate back to the surface. There will be no sealed system or sustained pressure, other than the draw force on 10ft water depth. Is there a simple on/off switch or will it work only by pressure switch? Is this pump suitable for continuous running (1-2hr increments)?
1. This is a clean water pump. It cannot pump water with particulate matter. It is recommended to install a check valve and a filter. 2. This pump can be used in this way, but it is necessary to ensure that all outlet pipes are opened to allow the water pump to operate normally. 3. The water pump can work continuously 2 hours. After the water pump continues to work, the surface temperature will be very high, so be careful not to get burned.
By vevor
