VEVOR Pool Filter Balls for Sand Filter, 3.1 lbs, Filter Balls Replace Pool Filter Sand, Reusable Blue Polyester Fiber Filter Media with Wash Bag, for Swimming Pool Aquarium Tank Above Ground Pool

The product is a pool filter ball specifically designed for sand filters. It is a motorless filter consumable and therefore does not have any power requirements such as voltage or amperes.

You will need 4 to 5 bags of 3.1-pound filter balls. If this answer does not resolve your issue, please contact us again for assistance.

700 g (1.54 lb) of filter balls replaces 25 kg (55 lb) of sand. So for 100 lb of sand, you need about 1.54 × (100 ÷ 55) ≈ 2.8 lb of filter balls. That means the 3.1 lb pack you linked is enough to replace roughly 110 lb of sand. If this answer does not resolve your issue, please contact us again for assistance.

Energy Saving: The fiber media is lightweight and water-saving, making it safe to pack the filter slightly more than the "standard" recommendation. If this answer does not resolve your current issue, please contact us again for assistance.

Yes, you can safely use the whole 3.1 lb bag. No Motor Strain: The material is soft and elastic, so increasing the amount will not significantly increase the load on the pump motor. Improved Efficiency: Using more than the minimum required amount actually improves filtration precision and efficiency without restricting water flow. Faster Filtration: The system is designed to handle higher volumes, offering a filtration rate 2–3 times faster than traditional sand under the same pressure.

Yes, fiber balls can remove sand without any problem.