Home Storage & Organization Office Supplies Labeling Label Makers Label Applicator

VEVOR Manual Round Labeling Machine, 15-20pcs/min, Bottle Label Applicator for Round Bottles, Adjustable Manual Round Bottle Labeler Suitable for Bottle Diameter 0.78-4.72 inches (with Pressing Bar)

Drive Mode: Manually

Add to Cart See all buying options

Questions and Answers

14 Questions

or Ask a Question

Is there an option or a replacement part to increase the label roller inner dimensions? My label cores are 3" .

Answer This Question

No, there isn't an option or a replacement part to increase the label roller inner dimensions.

By vevor

Helpful? 3

Would this labeler work with lip balm tubes?

Answer This Question

The length of the label is 10 to 300mm, and the width of the label is 10 to 130mm. Please refer to this.

By vevor

Helpful? 2

Your specs say the core size must be greater than or equal to .98", but does not outline if 3" cores are acceptable. Can you please confirm what size core(s) this machine will accommodate?

Answer This Question

Paper core size ≥75mm (can be clipped onto a baffle), ≥25mm (placed on a shaft).

By vevor

Helpful? 0

Does this machine accept rolls with 3" cores?

Answer This Question

No it does not support 3" cores. If this response does not resolve your issue, please contact us again for assistance.

By vevor

Helpful? 0

What is max label paper thickness requirements if any? What is label-to-label gap needed??

Answer This Question

The label types applicable to this product must be transparent labels or self-adhesive labels. The label width ranges from 10 to 130 mm, and the length ranges from 10 to 300 mm. The inner diameter of the label roll shall be ≥ 275 mm (for mounting on baffle) and ≥ 25 mm (for mounting on shaft). The outer diameter of the label roll shall be less than 180 mm. There are no requirements for the gap between labels.

By vevor

Helpful? 0