VEVOR Heat Exchanger, 5"x 12" 100 Plates Brazed Plate Heat Exchanger, Copper/316L Stainless Steel Water To Water Heat Exchanger For Floor Heating, Water Heating, Snow Melting, Beer Cooling

MBH rating is an abbreviation for "thousand British thermal units per hour" (M=thousand, B=British thermal units, H=hour), which is used to measure the thermal power or heat exchange capacity of a heat exchanger. Specifically, MBH represents the amount of heat that a device can transfer or absorb in one hour and is often used to evaluate the performance of a heat exchanger.

Hello, this is a copper-brazed plate heat exchanger. The main body is stainless steel and the solder is 99.9% pure copper. Copper is a heavy metal and is not recommended for use if the water quality requirements are very high.

Hello, the pressure of R32 refrigerant is generally within 30 kg when the plate changer is used as an evaporator, and the pressure will generally exceed 30 kg when the plate changer is used as a condenser. The design pressure of this model is 30 kg, that is, 30 bar, 3.0 MPa. As long as it does not exceed, it can be used. Please note that the refrigerant needs to be welded with a copper pipe inserted into the welding.

The heat exchanger can be used to pass water and ethylene glycol. The pressure resistance of this heat exchanger is 30 bar. We need to know your specific working conditions and the proportion of ethylene glycol before we can make a judgment.

The pressure drop of this model is relatively small, and steam can generally be used. The specific requirements depend on the pressure and temperature of your steam.