Your high-pressure cleaner needs to meet the working conditions of a 21-inch pneumatic scrubber. The nozzle aperture is 0.75 mm, and the spray angle is 25 degrees.
By vevor
75 MM orifice with a 65 degree spray angle. Reduce the orifice size if you re not satisfied with the performance. Of course, you will have to clean at a slower speed. I found it does a really great job when the next pass overlaps 1/2 of the 21” path you had just completed.
So far, a satisfied customer
Regards,
Brian
Hope this helps
NOTE:
- I find it quite unusual Vevor does not stock parts for
mine.
- The first reply states 2000PSI min. Man. 800PSI
By Brian
This comes down to the pump flow / pressure and the jet orifice size. The pressure is easy because the manufacturer states 800 psi is the minimum requirement for this 21” surface cleaner. Regarding flow: if you find you are not obtaining the effects you desire then change the jets to smaller orifice. My 21” surface cleaner. The manual states “025 nozzles”. What does this mean. After communicating with Vevor Ella(July 5, 2023)she stated the jets are ¼” NPT(maybe same as 025??)
By Brian
The pressure of the high-pressure cleaning machine can meet the working requirements of the pneumatic floor washing machine if it reaches above 2000psi.
By vevor