Delivery to
Your Address
VEVOR US EN/ USD
Select the country/region, language, and currency you prefer for shopping.
Hello, Sign in
Account & Order
VEVOR Spray Paint Pressure Pot Tank, 10L/2.5gal Air Paint Pressure Pot, 1.5mm+4mm Two Nozzles Two Spray Paint Guns, 60PSI Max, for Industry Home Decor Architecture Construction Automotive Painting

VEVOR Spray Paint Pressure Pot Tank, 10L/2.5gal Air Paint Pressure Pot, 1.5mm+4mm Two Nozzles Two Spray Paint Guns, 60PSI Max, for Industry Home Decor Architecture Construction Automotive Painting

10 L 1.5 mm + 4.0 mm
Questions and Answers
40 Questions
What parts are needed to convert to use as a pressure pot for epoxy resin?
It is necessary to block the discharge port and the air outlet, and remove the straw.
By vevor
How does this handle spraying lower volumes? Can you do only a quart at a time or does the tank have to have a minimum of xx liquid in it at all times
you can put this handle onto the Spray Paint Pressure Pot Tank and itwill work. no, a quart lidqure at a time cannot be used in one time. but you can drill a half of it.
By Quinn Geordie
How many gallons for this pot?)
it says the capacity within the listing. each model has a different capacity.
By Ann Young
The pot old 2 1/2 gals. I put about 2 gals in mine if it's not a real big job. Be sure to use the correct gun for what you are spraying
By Prima Hart
Can the fluid lines take the solvents needed to clean out epoxy resins? Will the lines break down by solvents?
It will have an impact but not much, and it will need to be replaced after a period of use.
By vevor
How is the inside cleaned of paint and what size of compressor
whatever you use to clean the paint from other sprayers or brushes. Latex, use soap and water, oil based, use paint thinner/mineral spirits etc.
By Keith Dan