VEVOR 6000W 48V Hybrid Solar Inverter, 120V/240V Split Phase, Built-in 120A MPPT Solar Controller, Low Frequency Pure Sine Wave Power Inverter Charger, for Lead Acid Lithium Battery Off-Grid Systems

It is recommended to adopt series first, then parallel. Match PV voltage within 60–150VDC (MPPT range) by series connection, then connect multiple series branches in parallel. Do not exceed the max PV input current 120A. Recommended Cable Sizing (PV DC Side) For Series Strings (≤15A/string): Use 10AWG (6mm²) PV wire (DC 1000V, 30A rating). For Parallel Main Lines (Total ≤120A): ≤50A: 8AWG (10mm²) 50–80A: 6AWG (16mm²) 80–120A: 4AWG (25mm²)

The total power of this machine is 6400W, and the total power of the two outputs cannot exceed 6400W.

Dear Customer, Thanks for your inquiry. The input voltage is 120 volts, but the size of the circuit breaker needed is not indicated. Answer: The power divided by the voltage is the current size of the air switch. Try to choose a larger one, because some products have false labels.

How can the inverter input 120 volts and output 240 volts when running in bypass/grid mode? Answer: The machine is designed to accept 110v/120v input and output 110v/220-240v. Just connect the wires according to the labels on the output end.

This unit cannot be split into phases and does not support WIFI or remote control.

No-load power is 32W.