Interesting question. I have not used it as a clay sheeter. Two issues would need to be addressed. (1) you will want a longer feed tray and a longer take-up tray; (2) The maximum opening size appears to be about one inch (2.54 cm). When the upper roller is raised all the way, there is little play up or down. It will roll a sheet that thick well I believe. But for a thinner thickness you will need to eliminate the play in the roller. It could be done. But it may be a fiddle depending on the thickness you want.
By Lee Harrington
Perhaps it would work. The input and output is not very big so you may want to use a sled under it to give a bigger surface. This would prevent the clay falling through between the 2 rollers and its gap. Hope this helps.
By Jean Bryce
I would imagine you could of you put the clay through on a flat board and have a cover over the clay
By Ivy Nixon
