VEVOR Laser Engraver, 5W Output Laser Engraving Machine, 16.1" x 15.7" Large Working Area, 10000mm/min Movement Speed, Compressed Spot with Eye Protection, Laser Cutter for Wood, Certain Metal

Questions and Answers

55 Questions

What else do I need to get started using the laser/cutter.? Do I need to buy a honey cone grid to raise it, an exhaust system? Will I be able to use right out of the box or do I need to buy other things besides material to cut?

Answer This Question

Generally, engraving does not require other accessories. A cutting board is placed at the bottom of the engraving machine to avoid damaging the tabletop. It is best to put honeycomb board under the material when cutting.

By vevor

Helpful? 11

Is this machine also cutting wood, metal ... materials?

Answer This Question

It cannot cut metal, it can only engrave metal. It can cut thin wood.

By vevor

Helpful? 10

can i upgrade the laser once i have the rig and have multiple lasers?

Answer This Question

Yes, there is no need to change the cable when upgrading to 10W.

By vevor

Helpful? 7

What software do i need??

Answer This Question

LaserGRBL can only be installed on WIN, and LightBurn can be installed on both systems.

By vevor

Helpful? 4

hi id like to cut through wood what is the max thickness of wood it can cut to make circle shapes etc. also does hardness of wood matter/type of wood/plywood matter? thanks.

Answer This Question

Plywood can be cut up to 3mm with one cutter, 4-5mm can be cut with multiple cutters, and hardwood can be cut up to 5mm with one cutter. It depends on the type of wood. The hard ones will be thinner, and the paulownia ones will be cut thicker.

By vevor

Helpful? 4