VEVOR Oil Transfer Pump 110V, 16 GPM 60 L/min, AC Electric Fuel Transfer Pump for Diesel Kerosene Biodiesel, 8 ft/2.4 m Max Suction Lift, 45 ft/13.7 m Max Lift, for Vehicles, Construction Sites, Farms

The primary medium conveyed is diesel fuel; it is not suitable for conveying large quantities of high-viscosity liquids.

This product is an AC diesel pump and cannot use water or other fuels.

The standard duty cycle for this VEVOR 110V 16 GPM Oil Transfer Pump is 30 minutes. To prevent the motor from overheating, it should be turned off to cool down for at least 20 to 30 minutes after every 30 minutes of continuous operation. The pump is equipped with an internal thermal overload protection switch that will automatically shut down the motor if it gets too hot during an extended run.

1.5 bar If this answer does not resolve your issue, please contact us again for assistance.

This machine can transfer fuels such as diesel, kerosene, and biodiesel from the fuel tank to other fuel tanks or vehicles and engineering equipment (excavators, tractors, etc.). It does not support the transfer of gasoline and water and is commonly used in construction, agriculture, and fleet operations.