AU is the light control mode. It will only turn on the light when the light is very dark at night. It will not turn on the light when the light is very bright. Please refer to the manual in the link and scan the QR code; https://we.tl/t-SaOcC9MAmy.
Can you run all of the lights off of one of the outputs and get 600 watts? I currently have a 300 watt unit that I am thinking of replacing with one of these but I have one wire running to everything in a row.
Can I simply turn power to the transformer on or off at a wall switch, without having to perform any “button pressing” at the transformer which will be behind bushes and plugged into an external outlet?
I have the 600 w and I connected in one of the groups 11 light of 12 W each that should be total of 132 W of usage but when I put my machine to check how many watt I’ve been used it should only 28 W that’s not right. Any ideas why this is happening
Hello, first of all, you need to test whether the output voltage of the transformer is normal. If the output voltage is around 12V-13V, then it means that the transformer is normal. In this situation, it is usually the problem of the LED bulb.
