VEVOR Benchtop Spiral Jointer, 8-Inch, 2HP with 10000 RPM, Featuring an 18-Blade Spiral Cutterhead, Extendable Arm to 6.5'', and a 8x42.3'' Worktable with 0-1/8'' Depth Adjustment for Woodcraft

The blade size is 15mm long x 15mm wide x 2.5mm thick. We regret to inform you that our website does not currently sell blades individually. Currently, products are sold in sets. However, we will give feedback on your needs to the company's purchasing department to increase our sales diversity. We hope that you can purchase the products you need on our website in the future.

The voltage is 120V and the rated current is 15A.

Once the tables are flat, use a machinist square to reset the fence to exactly $90^{\circ}$ relative to the outfeed table. if this answer does not resolve the current issue, please contact us again for assistance.

Use a metal straightedge to check if tables are coplanar (parallel); if they gap at the ends or middle, they need adjustment. Locate the four leveling hex bolts underneath each table bed which control the tilt and height of the infeed/outfeed surfaces. Loosen the locking nuts and turn the screws in 1/8th increments to raise or lower the far ends of the tables. Perform a diagonal check with your straightedge to ensure the tables aren't twisted relative to each other.

This machine does not have a dust outlet.

It is Aluminum die-casting