Home Paint Paint Supplies Paint Applicators Paint Sprayers Powder Coat Machine

VEVOR Powder Coating System, 50KV Electrostatic Output Powder Coating Kit with Foot Switch, Spray Gun, Nozzles and Powder Cups, Powder Coating Equipment for Home DIY and Commercial Production

Powder Output Rate: 220 g/min

Add to Cart See all buying options

Questions and Answers

12 Questions

or Ask a Question

Do you need an oven with this application?

Answer This Question

After spraying, it needs to be heated at 200 degrees for 10-30 minutes.

By vevor

Helpful? 2

How do I reduce the amount of powder being sprayed? I am using 30 psi air pressure and I have the air supply flow control set at the minimum and the powder is coming out of the gun to heavy.

Answer This Question

Please adjust the air pressure to a lower level, the range is: 10-30psi, adjust according to the powder output

By vevor

Helpful? 1

I'm thinking small copper, silver, bronze, pieces (jewelry) what type of paint do I use?

Answer This Question

It is recommended to use the Powder coating.

By vevor

Helpful? 1

Do I still need an air compressor for this?

Answer This Question

Yes, a 10-30 PSI air compressor.

By vevor

Helpful? 1

What materials do you use in the sprayer? Paint, etc. Does this have to be heated to 200 degrees? or is that just better?

Answer This Question

When using powder, be sure to heat it to cure it. If this answer does not resolve your issue, please contact us again for assistance.

By vevor

Helpful? 0