Delivery to
Your Address
VEVOR US EN/ USD
Select the country/region, language, and currency you prefer for shopping.
Hello, Sign in
Account & Order
VEVOR Sliding Barn Door Hardware Kit, 9FT Barn Door Kit, 330LBS Load-Bearing Double Barn Door Hardware Kit, Carbon Steel Barn Door Track, Darn Door for 1.37-1.77\" Thickness & 4.5FT Wide Door Panel

VEVOR Sliding Barn Door Hardware Kit, 9FT Barn Door Kit, 330LBS Load-Bearing Double Barn Door Hardware Kit, Carbon Steel Barn Door Track, Darn Door for 1.37-1.77\" Thickness & 4.5FT Wide Door Panel

9 ft
Questions and Answers
27 Questions
how many pieces make up 9'FT track? Is it two with joint in the middle?? Is it three with two joints? Is it more than 3?
It is three with two joints.
By vevor
can this be used outdoors?
It is recommended not to use it outdoors, otherwise it will reduce the service life of the product. Long-term exposure to the sun and rain outdoors will cause the product to rust.
By vevor
Do the tracks overlap continuously? Would an 8 ft wide door be able to slide across the entire 16 ft long track?
Yes they interconnect
By Rex Clapham
For Sliding Barn Door Hardware Kit, the track cannot overlap, the length of the track should be twice the width of the door. Therefore, the maximum width of the door is 5.5 feet /167 cm, and a suitable door thickness is 1.37-1.77 inches /35-45 mm. At the same time, it is best to leave a gap of 6 inches /15 cm above the door.
By Kirk Simpson
is the 10 foot for double doors ?
This kit has enough door brackets for two doors. Top rail is 10’, both doors can be 30” wide.
By Heloise Roosevelt
How are the tracks joined? Some review pics show a plate and some don't have plates
The tracks are connected kinda like a puzzle peice. Then a mounting lag bolt locks the parts together. It's an awsome set up. I installed them to separate the new addition inside on the back of my garage. Definitely buy again if needed
By Bernie Ted