1. Please confirm the ambient temperature at the time of use. The heating logic of the product is that it will run only when the ambient temperature is lower than the set temperature. The LED will display a wavy heating symbol, which means normal heating is in progress. When the ambient temperature is close to or higher than the set temperature, the product does not heat, which is also in line with usage habits.
By Tom
2. Please confirm what working mode the product is in. The product has H0, H1, and H2 modes (you can press the tilde key on the remote control or press and hold the M key on the machine for 3 seconds to view and switch the current working mode)
By Tom
3. H0 is just a simple FAN Mode. In this mode, it only supplies air and does not heat. H1 is a half-speed heating mode, which is only related to the output power, but the heating logic still refers to the first one (heating will only occur when the set temperature is higher than the ambient temperature). H2 is a full-power heating mode, which is heated at the maximum power. It also requires Heating will occur only when the set temperature is higher than the ambient temperature.
By Tom
