VEVOR 130W CO2 Laser Engraver, 55 x 35 in, CO2 Laser Engraver Cutter Machine with Water Chiller, 2 Way Pass Air Assist, 1200 mm/s Speed, Autofocus Engraving Cutting Machine, for Wood Acrylic Glass
130W
Questions and Answers
5 Questions
Where do you buy the laser tubes
Is there enough space between the laser head and the bed to use a rotary for engraving tumblers?
The lifting platform supports a 23cm adjustable height. You can check the processing diameter and overall size of your rotary attachment based on this parameter.
By vevor
On the laser power adjustment, what powers can the laser be adjusted to? (ie.. 30w, 50w, 100w, 130w)
The laser power is not adjusted by fixed wattage values; instead, you can customize the engraving intensity by adjusting parameters in the software or from the control panel, ranging from 20% to 99%, which corresponds to specific current outputs (measured in milliamperes
By vevor
Is the power of the laser adjustable on this unit or is it fixed at 130w ?
Yes, the laser power is adjustable from low to maximum, with 130W being the peak rated output of the tube, not a fixed operating level.
By vevor
Does it cut max metal sheets for letter signage
Need to cut metal plates? This machine is a non-metallic laser cutter and cannot be used on metal.
If this response does not resolve your current issue, please contact us again for assistance.
By vevor
