Home Electrical Electronics WiFi & Networking Devices Network Cable Testers

VEVOR Underground Cable Locator, 3 FT Max. Detection Depth, Wire Tracer Break Detector Finder with Earphone, 1000 FT Max.Detection Length Cable Tester for Pet Fence Buried Sprinkler Valve Irrigation

Max Detection Length: 1000 ft

Add to Cart See all buying options

Questions and Answers

12 Questions

or Ask a Question

Can you use it to locate wires in walls

Answer This Question

Yes, it can be used to locate wires in walls.

By vevor

Helpful? 3

Can it detect a single broken wire in plastic conduit?

Answer This Question

Yes. However, the detection depth cannot be that deep. It is estimated to be around 30cm, and the depth will be different depending on the soil quality.

By vevor

Helpful? 1

Can this be used to locate a break in 120 to 240 volt ac wires with the power off

Answer This Question

When detecting cables, the cables cannot be charged. As long as the depth is within 3ft, cables without shielding layers can be detected. Some cables have signal shielding layers, which will weaken the signal strength of the underground cable locator, making the detection depth unable to reach the ideal state.

By vevor

Helpful? 1

I have an electrical wire that appears to be shorted to ground or the metal conduit. The wire is buried outside under ground. As i trace the wire with the probe should the signal end where it's shorted.

Answer This Question

The signal will weaken if the cable cannot be detected. The circuit used to locate the cable must be de-energized. Here is a link to a demonstration video that you can use: https://s.vevor.com/bfQ1L0 If this response does not resolve your issue, please contact us again for assistance.

By vevor

Helpful? 0

I assume, that after the wire has been found with the "beeps", that when it stops beeping, that is where the "break in the wire" is?

Answer This Question

Do not test live cables If this answer does not resolve your issue, please contact us again for assistance.

By vevor

Helpful? 0