VEVOR Electric Trailer Jack, 5000 lbs, Heavy Duty RV Electric Power Tongue Jack with 2 Way Connector, Manual Crank Handle & Weatherproof Jack Cover, 10"-28.3" Lift, for RVs, Trailers & Campers, Black

This is a reasonably priced jack which installed easily and has worked perfectly.

I set mine at 35ft lbs, and that's eels to work ok

I just put blue lock tight on the bolts, and use round 130 Torque pounds. I don’t think there is any one torque requirement. I make it apart of my General check over before I leave the house that the bolts are tight.

There isn't a plug. It has wiring that you need to attach into the trailer wiring.

There is no plug. Just two wires. One to negative other to positive on your trailer

regular plug in the wall

There is no plug on the wire. I hooked it to my conjunction box that my 7 pin plug is hooked to

The plate is round. The 3 holes are drilled in a triangle to match the 3 in the tongue

Mine fit fine

Yes, my old one was round, this jack has Multiple offset holes, It should fit.

Haven't tried it, but I believe so! I think is the standard size shaft for interchangable feet/wheels/ accessories

Yes. The foot is removable, so a caster can go in it's place.

No, not unless you cut the platform off and drill a hole in the shaft to accept the removable wheel or flat plate.

it works great

You can take the regular stand out and I’m sure they make an insert with a wheel.

It has a removable base so I would think it would take a wheel easily .

It would have to be modified

Yes. Make sure it fits the inside diameter of the lower tube of the power jack.

I would think so, but my trailer is 10,000 plus d would be hard to push/pull around the

Yes, it's a great product and I am glad I bought it.